Top Victory Electronics Co Ltd LM1560 User Manual

 

5 

 

 

 
 
 
 
 

 

1.  Make sure the power cord is th e correct type required in your area. 

2.  This LCD monitor has an External universal power supply that allows 

operation in either 100/120V AC or 220/240V AC voltage area (No user 

adjustment is required.) 

3.  Connect the power cord into your LCD monitor’s power input socket, and 

then plug the other end into a 3 -pin AC power outlet. The power cord may 
be connected to either a wall power outlet or the power outlet socket on 
your PC, depending on the type of power cord supplied with your LCD 
monitor. 

 

 

 

A certified power supply cord has to be used with this equipment. The 

relevant national installation and/or equipment regulations shall be 

considered. A certified power supply cord not lighter than ordinary polyvinyl 

chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 

0.75mm

2

 or H05VVH2-F2 3G 0.75mm

2

) shall be used. Alternatively a flexible 

cord of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 

0.75mm

2

) may be used. 

 

Connect the signal cable’s 15 pin plug to 

monitor’s signal input port, locked it with screws. Then plug the other end to 

display card output port,locked it with screws.   

 

Plug the power cord into the  LCD 

monitor's AC power socket. Then  plug  the  power  cord  into a  grounded  
AC  outlet or UL-approved power strip or the power output socket on your PC. 

 

CONTROLS AND CONNECTORS