E F Johnson Company 2425770 User Manual
Viking Portable 600 Radio Operating Manual
7-3
Messages
Invalid - This error indicates that the received input from the user does not fit the
criteria necessary for the feature.
criteria necessary for the feature.
Invalid Chan - This error indicates that the channel entered by the user in keypad
programming is not valid.
programming is not valid.
Invalid ID - This error indicates that the ID entered by the user (e.g. for a Unit Call) is
not valid.
not valid.
Invalid Key - This error occurs when the user attempts to select an invalid key or
transmit is aborted due to an invalid key.
transmit is aborted due to an invalid key.
Invalid TG - This error indicates that the talkgroup entered into the radio during
Talkgroup Select or Keypad Programming is invalid.
Talkgroup Select or Keypad Programming is invalid.
Invalid User - This error indicates that the user’s radio ID was rejected by the system.
This message is primarily related to data registrations.
This message is primarily related to data registrations.
Key Fail - This error indicates that the encryption key required by the current selected
group / channel is not valid or does not exist.
group / channel is not valid or does not exist.
Kypd Lockd - This error indicates that the keypad lock function is active and key
presses are not accepted in this mode.
presses are not accepted in this mode.
Kset Fail - This error indicates that the radio was not able to activate the encryption
keyset chosen by the user.
keyset chosen by the user.
Locked - This error indicates that the dynamic regrouping selector lock command has
been received and zone and channel changes are not accepted.
been received and zone and channel changes are not accepted.
List Full - This error occurs during Scan Edit when a user attempts to add too many
channels to the scan list.
channels to the scan list.
List Only - This error occurs when the user attempts to do direct entry of a unit ID/
phone number for Call Alert/Units Calls/ or Interconnect but the call setting is set for
list only.
phone number for Call Alert/Units Calls/ or Interconnect but the call setting is set for
list only.
Lost Signal - This error indicates that signal from the infrastructure has been lost
during an interconnect call or a P25 Trunking unit call.
during an interconnect call or a P25 Trunking unit call.
Msg Failed - This error indicates that the message the user was trying to send failed.
This applies to conventional messaging.
This applies to conventional messaging.
No Ack - This error indicates that the radio did not receive an ACK for the current
signaling attempt, such as trunking units calls.
signaling attempt, such as trunking units calls.
No Answer - This error occurs when the user initiates a trunking unit/interconnect call
but the call was not answered before being canceled by the system.
but the call was not answered before being canceled by the system.
No Data - This error occurs when the user attempts to use the gps feature but the radio
is not receiving gps data.
is not receiving gps data.
No Edit - This error indicates that the current list is not able to be edited. Applies to
conventional and radio wide scan edit.
conventional and radio wide scan edit.
Preliminary Draft 3/9/12