Edgewater Wireless Systems Inc. EWC5XGWFR1 User Manual
Title:
EWC5XGWFR1 User Manual
Document Number: 001-00021
Edgewater Wireless
5
• Separate TX & RX antenna port via on-card non-standard RP-U.FL (UMCC) PCB connectors
• Authorized Antennas for use in US (FCC)
• Authorized Antennas for use in US (FCC)
o L-Com. Triple Element Dual Polarized Flat Panel Antenna, M/N: HG2458-14DP-3NF,
Gain 14 dBi
o Laird Tech. Tri-band whip omnidirectional antenna, M/N: RD2458-5, Gain 5 dBi
• Authorized Antennas for use in Canada (ISED)
o Laird Tech. Tri-band whip omnidirectional antenna, M/N: RD2458-5, Gain 5 dBi
• “The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
other antenna or transmitter.
”
Product Labels
• “The outside of the device into which the module is installed must display a label with Contains
FCC ID: ATX-EWC5XGWFR1, Contains IC: 10165A-EWC5X
GWFR1”
4 Thermal Considerations
The radio dissipates a maximum of 7.6watts. Consideration must be given to thermal management such
that sensitive components on the card do not exceed their maximum operation temperature. It is
recommended that the integrator use an aluminum heat sink adjacent to the RF shield.
The following table provides thermal info and constraints that the integrator must consider in designing
the thermal management scheme.
that sensitive components on the card do not exceed their maximum operation temperature. It is
recommended that the integrator use an aluminum heat sink adjacent to the RF shield.
The following table provides thermal info and constraints that the integrator must consider in designing
the thermal management scheme.
Component
Height
(mm)
Power
(W)
Package
(WxLxH mm)
Material
Rja
(°C/W)
R
jc
(°C/W)
R
jb
(°C/W)
T
max
(°C)
EN3301
2.0 ±.13
2.5
23x23x2.0 BGA w/
spread
Plastic, Cu
spread
15
1.8
7.3
118
Oscillator
2
0.23
7x5x2
Ceramic
33
8
110
PA
1.56
0.99
3x3x1 MSOP
Plastic w/ pad
25
8
150
EN3501
0.9 ±.1
1.25
7x7x 0.9 MLP
Plastic w/ slug
25
9.5
4
110
EN3101
1.6
2.65
12x12x2.4 FCBGA
with cap
Cu cap
20
2
5
105
Table 1
EWSI radio card
Thermal Specifications