Clarion 06CMBLT370 User Manual

BLT370

You can adjust the speaker volume in a call via your Transceiver unit.

1. Press the [VOL +] button to increase the volume.
2. Press the [VOL -] button to decrease the volume.

Notes: 

•  There are 19 volume levels where default level setting is 14 upon power up.
•  Use the [VOL +] and [VOL -] controls to adjust the telephone call reception  

  volume and minimize any echo generated.
•  Telephone default volume depends on each car stereo model. Please refer your  

  car stereo owner’s manual for further details.

You can switch to left or right channel output for a call.

1. Move the [L/R] selector to the right to enable right channel output.
2. Move the [L/R] selector to the left to enable left channel output.

•  If your car stereo supports telephone left/right selection, please make sure that  

  both  units  (car  stereo  and  Transceiver  unit)  are  set  to  the  same  output  

  channel.
•  For left-hand drive car, the audio should preferably come out from the right  

  speakers and vice-versa.

You can connect an external microphone to the Transceiver unit via the 2.5mm 

audio jack input for better voice reception. Audio input source will automatically 

switch from internal microphone to external microphone. Please consult your 

local authorized Clarion dealer for external microphone recommendation.

• Please use only 2.5mm jack external microphone.

5.  OPERATIONS FOR 

BLUETOOTH 

®

 AUDIO/MOBILE- 

  PHONE TRANSCEIVER UNIT

1EN_OM_Receiver BLT370.indd   22

4/5/07   2:14:35 PM