Vertex Standard USA Inc. 11373020 User Manual
8
EVX-261 O
PERATING
M
ANUAL
B
EFORE
Y
OU
B
EGIN
the left side when viewing the charger from the front.
If the battery pack is inserted correctly, the LED in-
dicator will glow red. A fully-discharged battery pack
will charge completely in 1.5 - 4.5 hours (depending
on the battery pack being charged).
will charge completely in 1.5 - 4.5 hours (depending
on the battery pack being charged).
When charging is completed, the LED indicator will
change to green.
Disconnect the battery pack from the CD-58 Desktop
Charger and unplug the
PA-55 AC Adapter from the
AC line outlet.
1) Always use the Vertex Standard FNB-V133LI-
UNI, FNB-V134LI-UNI Lithium-Ion Battery
UNI, FNB-V134LI-UNI Lithium-Ion Battery
Pack, or FNB-V136-UNI Nickel-Metal Hydride Battery
Pack.
2) Use only the Vertex Standard CD-58 Desktop Charger
with the PA-55 AC Adapter, or Vertex Standard approved
Charger.
3) To reduce the risk of explosion, recharge the batteries
outside of hazardous locations.
4) Perform the battery charging where the ambient tem-
perature range +41 °F to +104 °F (+5 °C to +40 °C).
Charging outside of this temperature range could cause
damage to the battery pack.
5) Battery Pack should not be exposed to excessive heat
such as sunshine, fi re, or similar heat sources.
Pack.
2) Use only the Vertex Standard CD-58 Desktop Charger
with the PA-55 AC Adapter, or Vertex Standard approved
Charger.
3) To reduce the risk of explosion, recharge the batteries
outside of hazardous locations.
4) Perform the battery charging where the ambient tem-
perature range +41 °F to +104 °F (+5 °C to +40 °C).
Charging outside of this temperature range could cause
damage to the battery pack.
5) Battery Pack should not be exposed to excessive heat
such as sunshine, fi re, or similar heat sources.
6) Risk of explosion exists if battery is replaced by an
incorrect type. Refer to the enclosed instructions for dis-
posal of used batteries.
7) When charging a Battery Pack alone (not attached to
the transceiver), do not allow any metal object to short
the terminals of the Battery Pack.
8) Do not allow any metal objects to short the terminals
in the nest of the CD-58 Desktop Charger, as a short-
circuit could cause overheating of the charger circuitry
and create an electrical hazard.
9) For further details and cautions of the charging, refer
to the Operating Manual of the CD-58 Desktop Charger.
incorrect type. Refer to the enclosed instructions for dis-
posal of used batteries.
7) When charging a Battery Pack alone (not attached to
the transceiver), do not allow any metal object to short
the terminals of the Battery Pack.
8) Do not allow any metal objects to short the terminals
in the nest of the CD-58 Desktop Charger, as a short-
circuit could cause overheating of the charger circuitry
and create an electrical hazard.
9) For further details and cautions of the charging, refer
to the Operating Manual of the CD-58 Desktop Charger.
Low Battery Indication
As the battery discharges during use, the voltage gradually
becomes lower. When the battery voltage becomes too
low, substitute a freshly charged battery and recharge the
depleted pack. The LED indicator on the top of the radio
will blink red when the battery voltage is low.
becomes lower. When the battery voltage becomes too
low, substitute a freshly charged battery and recharge the
depleted pack. The LED indicator on the top of the radio
will blink red when the battery voltage is low.
CAUTION
Danger of explosion if battery is replaced with an
incorrect battery. Replace only with the same or
equivalent type.
incorrect battery. Replace only with the same or
equivalent type.
Exhibit 8: Operating Manual
FCC ID: AXI11373020
IC: 10239A-11373020
Vertex Standard LMR, Inc.