Motorola Solutions Inc. 89FT3801 User Manual
Receiving a Call
1.
Turn radio on.
2.
Adjust volume level.
3.
Switch to desired channel.
4.
If at any time a call comes through, it will be heard at the
volume level set.
volume level set.
Emergency Alarm
1.
Press programmed
Emergency
button to initiate
Emer-
gency Alarm/Siren
.
2.
Press and hold
Emergency
button to cancel
Emergency
Alarm/Siren
.
3.
Press and release
Emergency
button to restart Emergency
sequence.
Starting or Stopping a Scan Operation
The LED Indicator will blink (green) during a scan operation. It
will stop blinking when the radio switches to a channel.
1.
will stop blinking when the radio switches to a channel.
1.
Press the preprogrammed
Scan
button to start a scan oper-
ation.
2.
Press the preprogrammed
Scan
button again to stop the
scan operation.
Deleting a Nuisance Channel
1.
While radio is on a Nuisance Channel, press and hold the
preprogrammed
preprogrammed
Scan
button until a tone is sounded.
2.
Release the preprogrammed
Scan
button.
Turning On the Radio
¥
Turn
On/Off/Volume
knob clockwise. Self Test Pass Tone
will sound and green LED will light up if radio powers up
successfully. If radio fails power up, the Self Test Fail Tone
will sound.
successfully. If radio fails power up, the Self Test Fail Tone
will sound.
Turning Off the Radio
¥
Turn
On/Off/Volume
knob counter-clockwise, until click is
heard.
Adjusting the Radio’s Volume
1.
Press and hold
Volume Set
button until continuous tone is
sounded.
2.
Turn
On/Off/Volume
knob to adjust volume level.
3.
Release
Volume Set
button when desired level is achieved.
Selecting a Radio Channel
¥
Turn
Channel Selector
knob clockwise or counter-clock-
wise to reach desired channel.
Sending a Call
1.
Turn on radio.
2.
Use
Channel Selector
knob to select the desired channel.
3.
Press
PTT
button, and speak clearly with mouth about 2.5
to 5 cm (one to two inches) away from microphone.
4.
Release
PTT
button when call is completed.