Motorola Solutions Inc. 89FT7036 User Manual
Identifying Radio Controls
English
10
Programmable Features
Any reference in this manual to a control that is
“preprogrammed” means that the control must be programmed
by a dealer or qualified radio technician using the radio's
programming software, in order to assign a feature to that
control.
“preprogrammed” means that the control must be programmed
by a dealer or qualified radio technician using the radio's
programming software, in order to assign a feature to that
control.
The programmable buttons can be programmed as shortcuts to
radio functions or preset channels/groups depending on the
duration of a button press:
radio functions or preset channels/groups depending on the
duration of a button press:
•
Press
–
Pressing and releasing rapidly.
•
Long press
–
Pressing and holding for the preprogrammed
duration (between 0.25 seconds and 3.75 seconds).
•
Hold down
–
Keeping the button pressed.
Assignable Radio Functions
Call Alert
–
Allows the radio to function like a pager, or to verify
if a radio is active on the system.
Call Response
–
Allows you to answer a private call.
Channel
–
Selectes a channel.
Contacts
–
Selects the Contacts menu.
Dynamic Priority (Conventional Only)
–
Allows any channel
in a scan list (except for the Priority-One channel) to temporarily
replace the Priority-Two channel.
replace the Priority-Two channel.
Emergency
–
Depending on the programming, initiates or
cancels an emergency alarm or call.
Information
–
Displays the information of the radio.
Internet Protocol Address
–
Displays the Internet Protocol (IP)
address, device name and status of the radio.
Location
–
Determines the current location (latitude, longitude,
time and date), and also the distance and bearing to another
location. Or, turns the GPS functionality on or off for all location.
location. Or, turns the GPS functionality on or off for all location.
Message
–
Enters the current message list.
Monitor (Conventional Only)
–
Monitors a selected channel
for all radio traffic until function is disabled.
Multiple Private Line (Conventional Only)
–
Selects the
Mulitple Private Line lists.
Nuisance Delete
–
Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list.
from the scan list.
One Touch 1 – 4
–
Launches a specific feature with one single
button-press. You can setup as much as four separately
programmed buttons for four different features.
programmed buttons for four different features.
Phone
–
Allows you to make and receive calls similar to
standard phone calls.
Private Call (Trunking Only)
–
Allows a call from an individual
radio to another individual radio.