Datron World Communications Inc G25RMV100 User Manual
D A T R O N W O R L D C O M M U N I C A T I O N S I N C .
Guardian VHF Mobile
10
Squelch is also adjustable from the main menu. For more information, refer
to the Radio Settings section.
to the Radio Settings section.
Transmit Inhibit Override
If the radio is set for transmit inhibit override, press
If the radio is set for transmit inhibit override, press
PTT
twice quickly to
transmit over an existing conversation on the channel. For more information,
refer to the Radio Settings section.
refer to the Radio Settings section.
Emergency Call
To activate, use the external user-supplied emergency switch (radio must be
programmed). The radio initiates and continues in an emergency call state
To activate, use the external user-supplied emergency switch (radio must be
programmed). The radio initiates and continues in an emergency call state
until the emergency call is deactivated.
To deactivate, press and hold the external user-supplied emergency switch
(radio must be programmed) until the radio beeps, or power off the radio with
To deactivate, press and hold the external user-supplied emergency switch
(radio must be programmed) until the radio beeps, or power off the radio with
the power-volume knob.
For information about setting the emergency switch to normal or silent, refer
to the Radio Settings section.
For information about setting the emergency switch to normal or silent, refer
to the Radio Settings section.
Selecting Encryption
Selection of encrypted or plain mode is automatic since channels are
Selection of encrypted or plain mode is automatic since channels are
programmed for plain or encrypted mode. If you attempt to reprogram the
radio from encrypted to plain, the radio generates an alert tone when
radio from encrypted to plain, the radio generates an alert tone when
PTT
is
pressed for an encrypted channel. For more information, refer to the Radio
Settings section.
Transmitting
Press the
Press the
PTT
button and speak at a normal level about 4 inches from the
microphone. Release the
PTT
button when finished speaking. Do not hold
the
PTT
longer than necessary after talking. Channels programmed for receive-
only operation sound an alert tone, display
RX ONLY
, and do not transmit.
Zeroizing Encryption Buttons
Use the external user-supplied emergency switch to zeroize (radio must be
Use the external user-supplied emergency switch to zeroize (radio must be
programmed) the encryption buttons. Selective zeroization is performed using
the programming (
the programming (
PROGRM
) menu, if enabled. For additional zeroizing
information, refer to the Radio Settings section.