Nautel Maine Inc VS300 User Manual
VS300 Operations and Maintenance Manual
Operating the transmitter
Page 2-92
Issue 0.1 2011-03-11
Setting pilot sample level
From the front panel, you can set the level of the pilot sample that is applied to the
PILOT SAMPLE
OUT (A1J4A)
BNC connector on the rear of the VS300. To view the
Pilot Sample
screen, select
User
Settings -> Pilot Sample
from the
Main Menu
(see
Figure 2.83
).
Figure 2.83: Pilot Sample Screen
Use the up and down buttons to edit the pilot sample level. Press the accept (checkmark) button to
save the change. Press cancel (
save the change. Press cancel (
X
) to discard changes and return to the previous menu.
Note:
Setting the pilot sample is only available using the front panel display.