Porta Phone Company Inc BLGD900M User Manual
USER MENU
1.
Power ON/OFF
Power ON: Press and hold the power button till to BLUE LED light up.
Power OFF: Press and hold the power button till to the RED LED flashing.
2.
Pairing/Register
a). Press and hold the power button to turn headset power ON, the power LED should blinking in BLUE
color.
b). Press the volume down button at 3 times continually, then press and hold the volume up button
till to the BLUE/RED LED blinking at alternately.
c). Same operation on both Master and Remote headset then closer each other.
d). The LED of Remote headset will turn RED after paired, press the power button to quit the pairing
mode.
e). Repeat the above step “a” to “d” for more Remote headset register on same Master, press the power
button to finish the register.
(Note: ○
1
. The Master headset can accept over 250 Remote register on the master, the first 4remote
communication in duplex, but the register after the 4
th
headset are listening only.
○
2
. The Remote headset memory just keep the latest two register data only, the 3
rd
register data will cover
the 1
st
,4
th
data will cover the 2
nd
, 5
th
cover the 3
rd
, continuing in the same way, the default program will
enable to run with the latest registered.
○
3
. The switching function of remote headset available to switch between the two Master if the headset
assembled with the switch and registered on two Master).
3.
Talking and listening
a). The master and remote headset will start to search each other after power ON, the BLUE LED flash 1
time each 3 seconds. The headset will be link together automatically when the pairing ID confirmed by
master and LED turn ON in blue color.
b). Press the volume up
and down
button to adjust speaker sound volume.
4. LED indicate
a). Pairing BLUE/RED LED blinking at alternately.
b). Signal Searching blue LED blinking slowly.
c). Battery Low RED LED double flash each 10 seconds.
4.
Mic Muted
Swivel up the Mic boom to MUTE the microphone and swivel down to back the normal talking.