UTC Fire & Security Americas Corporation Inc 799A-SOUND User Manual
4
Specifications
Compatibility
60-873-95: All ITI 319.5 MHz
Learn Mode™ panels
Housing material:
Flame retardant ABS
Dimensions:
4.24” (10.8 cm) length
3.13” (8.0 cm) width
1.70” (4.3 cm) depth
1.70” (4.3 cm) depth
Operational voltage:
2.6 to 4.5 VDC
Current draw:
26µA typical average
Battery Life:
5 years typical
Batteries:
(2) Duracell DL 123A 3V Lithium
Transmitter Frequency: 319.5 MHz
Transmitter Conditions: Alarm, Tamper, Low Battery
Supervisory
RF Immunity:
20V/meter 1MHz to 1000 MHz
Microphone:
Omnidirectional electret
Operating Temperature Range:
32° to 120°F (0° to 50°C)
Storage Temperature Range:
-30° to 140°F (-34° to 60°C)
Max. Humidity:
90% Relative Humidity (non-
condensing)
condensing)
© 2000 Interlogix, Inc.
Interlogix, Learn Mode, and Pattern Recognition Technology are
trademarks of Interlogix, Inc. ITI, Sentrol, and ShatterPro are registered
trademarks of Interlogix, Inc.
trademarks of Interlogix, Inc. ITI, Sentrol, and ShatterPro are registered
trademarks of Interlogix, Inc.
Protected under US and foreign patents including: 3,863,250;
4,745,398; 4,837,558; 4,885,713; 5,192,931; 5,805,063; 5,776,206;
5,872,512; 5,942,981; and other patents pending.
4,745,398; 4,837,558; 4,885,713; 5,192,931; 5,805,063; 5,776,206;
5,872,512; 5,942,981; and other patents pending.
Notices
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
❑
Reorient or relocate the receiving antenna.
❑
Increase the distance between the equipment and receiver.
❑
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
that to which the receiver is connected.
❑
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: B4Z-799A-SOUND