UTC Fire & Security Americas Corporation Inc 801-IXT User Manual

Simon XT

User Manual

Sending commands or instructing your security system is done through a series of key presses on the panel, 
touchpads, or a remote telephone.

Note:  The default master code is 1-2-3-4 when the security system is shipped from the factory. You should change your code 

after your system is installed. See 

 on page 26. 

Table 2.

System communication devices

Control panel

You can enter commands for your security system through simple key presses on the panel. 
Depending on how your system is programmed, you may need to enter an access code for 
certain commands. An access code is a numeric code that allows authorization to operate 
your security system.

Remote handheld touchpad

This touchpad gives you the option to enter commands from any room in your house. You 
can enter commands through simple key presses on the touchpad.

Keyfob

Keyfobs are handy for simple arming, disarming and light control functions. They are 
portable and can be carried off-site in a purse or pocket.

Telephone

Touchtone telephones can be used to communicate with your system while you are off-site. 
Ask your installer if you have this feature.