ACR Electronics ACR-AIS-300 User Manual
21 of 25
Y1-03-0222 Rev T4T4
6. STANDARDS
This product complies to all the necessary standards under the European R&TTE directive for Article 3.1(a),
3.1(b), 3.2 and 3.3(e). The following standards have been followed in pursuance of this:
3.1(b), 3.2 and 3.3(e). The following standards have been followed in pursuance of this:
• IEC62287-1: 2006-03 Maritime navigation and radio communication equipment and systems – Class B
ship borne equipment of the automatic identification system (AIS) – Part 1: Carrier-sense time division
multiple access (CSTDMA) techniques
multiple access (CSTDMA) techniques
• IEC60945: 2002-08 Maritime navigation and radio communication equipment and systems – General
requirements – Methods of testing and required test results
• IEC61162-1: Maritime navigation and radio communication equipment and systems – Digital interfaces
– Part 1: Single talker and multiple listeners
• IEC61108-1: GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) – Part 1: Global positioning
system (GPS) -Receiver equipment - Performance standards, methods of testing and required test
results
results
• EN 301 843-1 v2.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic
Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical
requirements
requirements
• EN 50383: 2002 Basic standard for calculation and measurement of electromagnetic field strength and
SAR related to human exposure from radio base stations and fixed terminal stations for wireless
telecommunications system (110MHz – 40GHz)
telecommunications system (110MHz – 40GHz)
• EN60950-1:2006 Information technology equipment – Safety – Part 1: General requirements
6.1 Product
Specification
Parameter Value
Dimensions
7.8 x 6.22 x 1.84 in. (198 x 158 x 46.7 mm)
Weight
13.2 oz (375g)
Power DC
(9.6-15.6V)
Average power consumption 4W
Peak current rating 2A
GPS Receiver (AIS Internal)
IEC 61108-1 compliant
Electrical Interfaces
RS232 38.4kBaud bi-directional
RS422 NMEA 38.4kBaud bi-directional
Connectors
VHF Antenna connector (UHF female bulkhead connector)
GPS Antenna connector (TNC female bulkhead connector)
Cable – Data/Power
RS232 / RS422 / Data / Power (15-pin Connector)
Typically, 1.5 meter DSUB
Typically, 1.5 meter DSUB
VHF Transceiver
Transmitter x 1
Receiver x 2 (One receiver time shared between AIS and DSC)
AIS1: 161.975 MHz
AIS2: 162.025 MHz
AIS2: 162.025 MHz
Frequency: 156.025 to 162.025 MHz in 25 kHz steps
Output Power
33dBm ± 1.5 dB
Channel Bandwidth
25kHz
Channel Step
25kHz
Modulation Modes
25kHz GMSK (AIS, TX and RX)
25kHz AFSK (DSC, RX only)
Bit rate
9600 b/s ± 50 ppm (GMSK)