Transition Networks CGETF1040-110 Leaflet

Page of 1
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Migrate to Gigabit Ethernet
Specifications
Complete list of fiber optic connector specifications [pg 212-224]
Standards
IEEE Std. 802.3ab and IEEE Std. 802.3z
6-position Switch
SW1: Remote Fiber Fault Detect (Down=Enabled)
SW2: Symmetric Pause
SW3: Asymmetric Pause
SW4: Transparent Link Pass Through (UP=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback (Down=Enabled)
3-position Jumper
Hardware: Converter mode is determined by 
6-position switch settings
Software: Converter mode is determined by most recently
saved on-board microprocessor settings
Status LEDs
PWR (Power): ON=connection to external AC power
LKF (Fiber Link): ON=fiber connection
RXC (Copper Receive): Flashing=Receiving data on
copper link; ON=Copper Link connection
Duplex: ON=Copper Link connection
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.4 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A + EN55024; FCC Class A; 
CE Mark
Warranty
Lifetime
Ordering Information
CGETF1013-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-SX 850nm multimode (SC)
[62.5/125 µm fiber: 220 m/722 ft.]
LInk Budget: 7.0 dB
[50/125 µm fiber:  550 m/1804 ft.]
Link Budget: 7.0 dB
CGETF1039-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-SX 850nm multimode (LC) 
via SFP
[62.5/125 µm fiber: 220 m/722 ft.]
LInk Budget: 8.0 dB
[50/125 µm fiber:  550 m/1804 ft.]
Link Budget: 8.0 dB
CGETF1024-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1310nm Extended MM
(62.5/125 µm fiber only) (SC) 
[2 km/1.2 mi.] Link Budget: 7.0 dB
CGETF1014-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget:  10.5 dB
CGETF1015-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
CGETF1017-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
CGETF1035-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
CGETF1040-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-X SFP Slot (empty)
Single Fiber Products
Recommended use in pairs
CGETF1029-110
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1310nm TX/1550nm RX 
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGETF1029-111
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1550nm TX/1310nm RX 
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGETF1029-112
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1310nm TX/1550nm RX 
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGETF1029-113
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1550nm TX/1310nm RX 
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGETF1029-116
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1510nm TX/1590nm RX 
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 24.0 dB
CGETF1029-117
1000BASE-T (RJ-45) 
[100 m/328 ft.]
to 1000BASE-LX 1590nm TX/1510nm RX 
single fiber single mode (SC) 
[80 km/49.7 mi.] Link Budget: 24.0 dB
Optional Accessories
(sold separately)
SFP Modules
CGETF10xx-11x
point system™ slide-in-module media converter

Migrate to Gigabit Ethernet in a cost-effective
manner. Used in conjunction with lower cost
1000BASE-T switches, companies can take ad-
vantage of the high bandwidth Gigabit Ethernet
offers, without all of the higher costs. Transition
Networks 1000BASE-T to SX/LX converters allow
users to extend the bandwidth to those users out-
side the reach of the 1000BASE-T standard (up
to 125 km).
1000BASE-T to 1000BASE-SX/LX
see also: 
Gigabit Etherner Stand-Alone Converter
Gigabit Ethernet Media Converter
Features

Copper & Fiber Auto-Negotiation

Transparent Link Pass Through 

Automatic Link Restoration 

Remote Fault Detect

Loopback

Pause

Field Upgradeable Firmware

DMI - Diagnostic Monitoring Interface supported 
on CGETF1040-110 when an SFP supporting 
DMI is used

DMI models have four functions:
• Transmit Power
• Receive Power
• Transmit bias current
• Temperature
Within each function, the device will send a trap 
(i.e. error)
whenever a high or low warning event 
or a high or low alarm event occurs 
(for a total of 16 traps)
.
Gigabit Ethernet