Apple E2430A User Manual
Repairing or Modifying iPhone Never attempt to repair or modify
iPhone yourself. iPhone does not contain any user-serviceable parts,
except (where applicable) for the SIM card and SIM tray. Disassembling
iPhone, including the removal of external screws and back cover, may
cause damage that is not covered under the warranty. If iPhone has been
submerged in water, punctured, or subjected to a severe fall, do not
use it until you take it to an Apple Authorized Service Provider. Service
should only be provided by Apple or an Apple Authorized Service
Provider. If you have questions, contact Apple or an Apple Authorized
Service Provider. For service information, go to:
www.apple.com/support/iphone/service/faq
Battery Replacement Do not attempt to replace the rechargeable
battery in iPhone yourself. The battery should be replaced only by
Apple or an Apple Authorized Service Provider. For more information
about battery replacement service, go to:
www.apple.com/batteries/replacements.html
Charging iPhone To charge iPhone, use only the Apple Dock Connector
to USB Cable with the following: (i) an Apple USB Power Adapter,
(ii) another Apple-branded product or accessory designed to work with
iPhone, (iii) a third-party accessory certified to use the Apple “Works with
iPhone” or “Made for iPhone” logo, (iv) a high-power USB port on another
device that is compliant with the USB 2.0 or 1.1 standard, or (v) a power
adapter compliant with one or more of the following standards EN
301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITU L.1000, or another
applicable mobile phone power adapter interoperability standard.
An iPhone Micro USB Adapter (available separately in some areas) or
other adapter may be needed to connect iPhone to some compatible
power adapters.
Note: Only micro USB power adapters in certain regions that comply
with applicable mobile phone power adapter interoperability standards
are compatible. Please contact the power adapter manufacturer to find
out if your micro USB power adapter complies with these standards.
Read all safety instructions for any products and accessories before using
with iPhone. Apple is not responsible for the operation of, or any damage
caused by, third-party accessories or their compliance with safety and
regulatory standards.
When you use the Apple USB Power Adapter to charge iPhone, make
sure that the power adapter is fully assembled before you plug it into
a power outlet. Then insert the Apple USB Power Adapter firmly into
the power outlet. Do not connect or disconnect the Apple USB Power
Adapter with wet hands.
The Apple USB Power Adapter may become warm during normal use.
Always allow adequate ventilation around the Apple USB Power Adapter
and use care when handling. Unplug the Apple USB Power Adapter if any
of the following conditions exist:
iPhone yourself. iPhone does not contain any user-serviceable parts,
except (where applicable) for the SIM card and SIM tray. Disassembling
iPhone, including the removal of external screws and back cover, may
cause damage that is not covered under the warranty. If iPhone has been
submerged in water, punctured, or subjected to a severe fall, do not
use it until you take it to an Apple Authorized Service Provider. Service
should only be provided by Apple or an Apple Authorized Service
Provider. If you have questions, contact Apple or an Apple Authorized
Service Provider. For service information, go to:
www.apple.com/support/iphone/service/faq
Battery Replacement Do not attempt to replace the rechargeable
battery in iPhone yourself. The battery should be replaced only by
Apple or an Apple Authorized Service Provider. For more information
about battery replacement service, go to:
www.apple.com/batteries/replacements.html
Charging iPhone To charge iPhone, use only the Apple Dock Connector
to USB Cable with the following: (i) an Apple USB Power Adapter,
(ii) another Apple-branded product or accessory designed to work with
iPhone, (iii) a third-party accessory certified to use the Apple “Works with
iPhone” or “Made for iPhone” logo, (iv) a high-power USB port on another
device that is compliant with the USB 2.0 or 1.1 standard, or (v) a power
adapter compliant with one or more of the following standards EN
301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITU L.1000, or another
applicable mobile phone power adapter interoperability standard.
An iPhone Micro USB Adapter (available separately in some areas) or
other adapter may be needed to connect iPhone to some compatible
power adapters.
Note: Only micro USB power adapters in certain regions that comply
with applicable mobile phone power adapter interoperability standards
are compatible. Please contact the power adapter manufacturer to find
out if your micro USB power adapter complies with these standards.
Read all safety instructions for any products and accessories before using
with iPhone. Apple is not responsible for the operation of, or any damage
caused by, third-party accessories or their compliance with safety and
regulatory standards.
When you use the Apple USB Power Adapter to charge iPhone, make
sure that the power adapter is fully assembled before you plug it into
a power outlet. Then insert the Apple USB Power Adapter firmly into
the power outlet. Do not connect or disconnect the Apple USB Power
Adapter with wet hands.
The Apple USB Power Adapter may become warm during normal use.
Always allow adequate ventilation around the Apple USB Power Adapter
and use care when handling. Unplug the Apple USB Power Adapter if any
of the following conditions exist:
Â
The power cord or plug has become frayed or damaged.
Â
The adapter is exposed to rain, liquid, or excessive moisture.
Â
The adapter case has become damaged.
Â
You suspect the adapter needs service or repair.
Â
You want to clean the adapter.