Andrew Wireless Innovations Group MRB-LMR User Manual
4. Setting Up for Initial Operation
MR Booster Manual: (MN001808-1, 9/99)
Page 31
Command
Meaning
Purpose
HEL
Help
Lists the syntax and function of the primary
commands.
commands.
HEL A
Help All
Lists the syntax and function of all commands.
SET
Set up
Prompts a menu-driven entry mode used to inspect
or change all MR Booster operating parameters.
or change all MR Booster operating parameters.
(To exit this command, press <CTRL> X and answer
N; press Enter.)
N; press Enter.)
SSS
Show System Status
Lists current repeater parameter settings and
conditions of monitored input parameters.
conditions of monitored input parameters.
ALA
Alarm report
Reports on number of alarm conditions since last
system reset.
system reset.
RES
Reset
Resets the booster. Parameters in effect when the
command is issued will be saved.
command is issued will be saved.
PWR
Power display
Lists power readings on the PAs.
Table 4-3. System commands
4.3.4
Ending a Session
The RES command preserves extensive parameter changes made during a
session. It ensures that all parameter changes take effect, since all hardware is
initialized after a reset. Also, all alarms conditions counter to 0.
session. It ensures that all parameter changes take effect, since all hardware is
initialized after a reset. Also, all alarms conditions counter to 0.