Andrew Wireless Innovations Group RPT-MMR8-19I User Manual

User’s Manual for Remote Unit

MMR8/19

Page 8

M0106A7E.doc

1.  Only suitably qualified personnel is allowed to work on this unit and only after

becoming familiar with all safety notices, installation, operation and maintenance
procedures contained in this manual.

2.  Read and obey all the warning labels attached to the unit. Make sure that the

warning labels are kept in a legible condition and replace any missing or
damaged labels.

3.  Obey all general and regional installation and safety regulations relating to work

on high voltage installations, as well as regulations covering correct use of tools
and personal protective equipment.

4.  Keep operating instructions within easy reach and make them available to all

users.

5.  It is the responsibility of the network provider to implement prevention measures

to avoid health hazards which may be associated to radiation from the antenna(s)
connected to the unit.

6.  Make sure, access is restricted to qualified personnel.

7.  Use this equipment only for the purpose specified by the manufacturer. Do not

carry out any modifications or fit any spare parts which are not sold or
recommended by the manufacturer. This could cause fires, electric shock or other
injuries.

8.  Due to power dissipation, the remote unit may reach a very high temperature.

9.  Before opening the unit or (dis-)connecting the mains connector at the remote

unit, ensure that mains supply is disconnected.

10. ESD precautions must be observed! Before commencing maintenance work, use

the available grounding system to connect ESD protection measures.

11. This unit complies with European standard EN60950.

12. Make sure the system settings are according to the intended use (see also

product information of manufacturer) and regulatory requirements are met.

13. Although the remote unit is internally protected against overvoltage, it is strongly

recommended to earth the antenna cables close to the remote unit’s antenna
connectors for protection against atmospheric discharge.

14. Laser radiation – Class 1! Do not stare into the beam, do not view it directly or

with optical instruments.