Andrew Wireless Innovations Group RPT-MOR801 User Manual
User’s manual for Remote Unit MOR801B Power
M0070A0A.doc
Id.-No 151155
Page 65
18-June-99
For mounting proceed in reverse order.
Position of the control module in the Repeater is illustrated in figure 9-11 Position of control
module.
module.
figure 9-11 Position of control module
9.10 Replacement of power supplies
Note:
Ensure that mains are disconnected.
There are three power supplies mounted in the Repeater housing, two on each side. Open the
Repeater to get access to the devices.
Repeater to get access to the devices.
Remove all connected cables from the clamps of the power supply. Try to loose the plug by
means of a small screwdriver placed between the plug and socket.
means of a small screwdriver placed between the plug and socket.
ON
Fuse 10A / 35V
figure 9-12 Power supply