Andrew Wireless Innovations Group RPT-MR701 User Manual
User’s manual for Repeater MR801B Power
M0067A0A.doc
Id.-No 151111
Page 60
02-JUNE-99
The cables have to be connected like shown below.
figure 9-6 Cable configuration of the duplexers
Unscrew the four counter sunk screws M3 at the connector panel of the Repeater. See figure
9-7 Connector panel layout.
9-7 Connector panel layout.
figure 9-7 Connector panel layout
9.8 Replacement of RF modules
To remove the RF modules, disconnect the SMA connectors by means of a torque wrench.
If the Repeater is equipped with TDMA modules, the external filter on top of the modules
must be dismounted beforehands. The external filter box covers two of the socket head cap
screws the TDMA module is fixed with.
must be dismounted beforehands. The external filter box covers two of the socket head cap
screws the TDMA module is fixed with.
Unscrew the socket head cap screw on top of the external filter box, pull the box carefully off
and continue the dismounting procedure like described below.
and continue the dismounting procedure like described below.