Andrew Wireless Innovations Group RPT-MR703P User Manual

U

SER

´

S MANUAL FOR BAND SELECTIVE REPEATERS 

MR

X

03P 

 

 

User'sManual.doc 

Id.-No.:154999 

Page 27 

22-Jan-01 

 

 
Grounding must be carried out under all circumstances. An earth bonding cable must 
be connected to the grounding bolt provided at the outside of the cabinet on the left-
hand side. Do not use the grounding screw for connecting external devices. The 
complete grounding kit is part of the delivery schedule. 
 
The complete grounding kit is part of the delivery schedule. 
 

 

 
Before connecting electrical power to the repeater, it must be grounded. The repeater 
is equipped with a firmly connected mains cable which is fed into the housing through 
a watertight cable gland. Due to safety reasons, the power supply lead must be 
protected by fuses. Inside the repeater, the mains cable is connected to a screw 
terminal on the connecting board. In case the length of the power cable should not be 
sufficient, it can be replaced by a longer cable.