Lifeline Systems Inc. 7101MHB User Manual

Page of 64
4
Questions? Call 1-800-635-6156
About This Manual  
Training 
Reading and understanding these Instructions for Use and 
the Quick Setup Guide serves as adequate training for the 
installation, use and disposal of the equipment. 
Users of this 
product must review and understand the Instructions for Use  
document to help provide safe and effective use.
 
If you require further information about training in the use of 
this product, please contact Philips Lifeline or your Philips 
Lifeline representative. 
Definitions & Clarifying Terminology
7150MHB: The model name for the GoSafe 2 Mobile Pendant 
for FDA registration purposes. This name is used in the 
“Alarms” and “Safety and Regulatory Compliance” sections. 
Alarm State: When you press the Help Button or when an 
un-revoked fall is detected, the Pendant will initiate a help call 
to the Philips Lifeline Response Center. During this time, until 
the Pendant is reset, the Pendant is in Alarm State. Certain 
behaviors described herein only take place during Alarm State.
Audio Beacon: A very loud, siren-like noise generated by the 
Pendant that can be activated by the Response Center during 
Alarm State. It is designed to help responders find you more 
easily while searching for you. Refer to page 25.  
AutoAlert: The Philips fall detection technology that is used by 
the GoSafe 2 Mobile Pendant.  
Agency 
Filing 
Copy