APC Combination Lock Handle AR8132 User Manual

1. Remove the screws from the lock.

2. Remove the handle and screw plate from the NetShelter enclosure.

• If your rack has a latch bracket that is 1.35 inches (34.3 mm) deep, use the cam that is pre-

installed on the combination lock.

• If your rack has a latch bracket that is 2.17 inches (55.2 mm) deep, replace the pre-installed cam 

with the smaller cam (provided).

a. Remove the screw holding the pre-installed cam in place. Slide the cam off the lock.

b. Replace the old cam with the smaller cam and secure it in place, using the screw removed in step a.