Lancom Systems L-322AGN User Manual
LANCOM L-322agn
Scope of features: as of LCOS version 8.5x
SSH & Telnet client
SSH- client function compatible to Open SSH under Linux and Unix operating systems for accessing third- party components from
a LANCOM router. Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-
based authentication. Generates its own key with sshkeygen. SSH client functions are restricted to administrators with
appropriate rights. Telnet client function to login/administer third party devices or other LANCOM devices from command line
interface
a LANCOM router. Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-
based authentication. Generates its own key with sshkeygen. SSH client functions are restricted to administrators with
appropriate rights. Telnet client function to login/administer third party devices or other LANCOM devices from command line
interface
HTTPS Server
Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server
Security
Access rights (read/write) over WAN or (W)LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control list
Scripting
Scripting function for batch- programming of all command- line parameters and for transferring (partial) configurations,
irrespective of software versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or
connection establishment and termination to run scripts for automation. Scripts can send e- mails with various command line
outputs as attachments
irrespective of software versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or
connection establishment and termination to run scripts for automation. Scripts can send e- mails with various command line
outputs as attachments
Load commands
LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the
command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new
version is available. In addition, LoadFile allows the upload of files including certificates and secured PKCS- 12 containers
command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new
version is available. In addition, LoadFile allows the upload of files including certificates and secured PKCS- 12 containers
SNMP
SNMP management via SNMPv2, new unified private MIB for all most current and future LANCOM devices with LCOS. Download
link in WEBconfig
link in WEBconfig
SNMP
SNMP management via SNMPv2, private MIB exportable by WEBconfig, MIB II
Timed control
Scheduled control of parameters and actions with CRON service
Diagnosis
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging
buffer for SYSLOG and firewall events
buffer for SYSLOG and firewall events
LANCOM WLAN Controller
Supported by all LANCOM WLAN Controller (separate optional hardware equipment for installation, optimization, operating and
monitoring of WLAN networks, except for P2P connections)
monitoring of WLAN networks, except for P2P connections)
SYSINFO
SYSINFO provides additional information. Hash value for the current configuration, time stamp of the last configuration change,
a persistent counter of the number of configuration changes and the output of the value CONFIG_STATUS
a persistent counter of the number of configuration changes and the output of the value CONFIG_STATUS
Statistics
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting
Connection time, online time, transfer volumes per station. Snapshot function for regular read- out of values at the end of a
billing period. Timed (CRON) command to reset all counters at once
billing period. Timed (CRON) command to reset all counters at once
Export
Accounting information exportable via LANmonitor and SYSLOG
Hardware
Power supply
12 V DC, external power adapter (230 V)
Power supply
Via Power over Ethernet, compliant with IEEE 802.3af
Environment
Temperature range 0–45C; humidity 0–95%; non- condensing
Housing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)
Power consumption (max)
approx. 10.7 Watt with 12 V/ 1 A power supply adapter (total power consumption of access point and power supply adapter),
approx. 14.4 Watt via PoE
approx. 14.4 Watt via PoE
Declarations of conformity
CE
EN 301 489- 1, EN 301 489- 17, EN 60950
2.4 GHz WLAN
ETS 300 328
5 GHz WLAN
EN 301 893 version 1.5.1, EN 302 502 (BFWA)
Notifications
Certifications notified in Germany, Belgium, Netherlands, Luxembourg, Austria, Switzerland, UK, Italy, Spain, France, Portugal
Package content
Manual
Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD
Data medium with firmware, management software (LANconfig, LANmonitor, WLANmonitor) and documentation
Cable
Serial configuration cable, 1.5m
Cable
1 Ethernet cable, 3 m
Antenna
Four 3 dBi dipole dualband antennas
Power supply unit
12 V DC, external power adapter (230 V)
Support
Warranty
3 years
Support via Hotline and Internet KnowledgeBase
Software updates
Regular free updates (LCOS operating system and LANCOM Management System) via Internet
Management