Mitsubishi Electric Corp 485 User Manual
37
Specifications
Reference page
Specifications
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
Design and specifications are subject to change without notice.
Note
If the VCR is not working correctly or showing an unusual indication on the fluorescent display, press the RESET button on the back panel using a
pointed instrument. When pressed, Date/Present time/ALARM LIST/POWER LOSS LIST/Counter display/Recording and Playback mode will be set
to the default setting and the VCR turns off.
To restart the VCR, press the POWER button to turn on the VCR, and then set the day and present time.
pointed instrument. When pressed, Date/Present time/ALARM LIST/POWER LOSS LIST/Counter display/Recording and Playback mode will be set
to the default setting and the VCR turns off.
To restart the VCR, press the POWER button to turn on the VCR, and then set the day and present time.
Connectors
ALM Input
ALM Input
Screw terminal for starting alarm recording
RST Input
Screw terminal for finishing alarm recording or for
adjusting on-screen clock
adjusting on-screen clock
REC Input
Screw terminal for starting/finishing recording or for
series recording
series recording
GND
Screw terminal for ground
ALM Output
Screw terminal for output while alarm recording is
under way
under way
CLK Output
Screw terminal to command camera switching
MODE Output Screw terminal for indication of VCR selected mode
CALL Output
CALL Output
Screw terminal for external warning device or for
series recording
series recording
RS-485 Interface
RJ-45 (female) connector
Video
Input
Input
1.0 V (p-p), 75
, BNC plug
Output
1.0 V (p-p), 75
, BNC plug
Signal-to-Noise Ratio
Better than 42 dB
Horizontal Resolution
More than 330 lines (black & white)
More than 240 lines (color)
More than 240 lines (color)
Audio
Input
Input
308 mV (rms), 50 k , RCA plug
Output
388 mV (rms), 1 k , RCA plug
Signal-to-Noise Ratio
Better than 43 dB
Frequency Response
70 Hz - 4 kHz (8H mode)
General
Power Source
Power Source
100-230 V ac
±
10%, 50/60 Hz
(The included power cord is used for
120 V, 60 Hz.)
120 V, 60 Hz.)
Power Consumption
Approx. 18 Watts
Television System
CCIR standard 525 lines, 60 field
NTSC
NTSC
Color Signal
Low frequency conversion, sub-carrier
phase shift recording
phase shift recording
Tape Format
VHS 1/2” width high-density video
cassette tape
cassette tape
Tape Speed and Recording Time See below (*1)
Fast Forward/Rewind Time
Fast Forward/Rewind Time
Approx. 90 seconds with T-120 tape
Approx. 120 seconds with T-160 tape
Approx. 120 seconds with T-160 tape
Operating Temperature
41
°
F to 104
°
F (5
°
C to 40
°
C)
Relative Humidity
Max. 80 %
Dimensions (JOG dial included) 16.7 W x 12.4 D x 3.7 H in.
(425 W x 314 D x 95 H mm)
Weight
9 lbs (4.2 kg)
Heads-Video
4 rotary heads
Luminance Signal
Frequency modulation recording
Audio Track
1 track
Audio/Control
1 stationary head
Erase
1 full-track head
Motors
3 motors-drum/capstan direct drive
system
system
Battery Backup
31 day
(*1)
Tape Speed and Recording Time (with T-160 cassette):
Tape Speed and Recording Time (with T-160 cassette):
MODE
8H (EP)
L24H (EP)
L40H (EP)
L24H (EP)
L40H (EP)
TIME
(hour:minute)
TAPE
SPEED
(mm/s)
11.12
3.71
2.22
2.22
RECORDING
INTERVAL
(s/field)
0.0167
0.050
0.083
0.083
NUMBER OF
RECORDING FIELDS
(fields/s)
60
20
12
20
12
MPX field delay
setting *1
002
003
005
003
005
AUDIO
Yes
Yes
Yes
Yes
Yes
TAPE DRIVE
RECORDING
Continuous
Continuous (Slow)
Continuous (Slow)
Continuous (Slow)
8:00
24:00
40:00
40:00
*1 Case of using Dedicated Micro's MPX.