Zhejiang Flashforge 3D Technology CO. Ltd. GUIDERII User Manual
GuiderⅡ User Guide | www.flashforge.com
0086-0579-82273989
52
pops up. You need to select “Wi-Fi” in Connect Mode. Enter into the IP Address
shown on the interface and then click [Connect].
shown on the interface and then click [Connect].
6-19
If successfully connected, you will see the following red mark.
②
Connect GuiderⅡ with your PC under STA mode
a. Turn on the WIFI of GuiderⅡ and connect your PC with GuiderⅡ via the
WIFI. Press
[ Tools ]
,
[ Setting ]
,
[ WIFI ]
, and
[ WIFI ON]
.
b.“GuiderⅡ” continuous signal will be found available on the network list.
c. Once your PC is connected with your GuiderⅡ. Open the Internet browser and
enter “
10.10.100.254
” and enter the default
user name(admin) and
password(admin)
.
6-20