TQL TRADING INC TQ-LT1502 User Manual

Page of 2
USER MANUAL
PROFESSIONAL  SPEAKER
PLEASE READ THIS USER MANUAL CAREFULLY BEFORE SYSTEM CONNECT
MADE IN CHINA
TQ-LT1203 / TQ-LT1204
TQ-LT1502 / TQ-LT1503
TQ-LT1502                       TQ-LT1503
Before using this machine, please read all the safety and operating instructions,
meanwhile, please observe all the indications about safe operating. These safety and
operating instructions should be kept in condition of consultation.
1. Protection of electric power supply line: Be aware that the electric power supply line is not 
tramped, pressed by heavy objects. Pay special attention to the plug of power supply line and outlet
on the machine. DO NOT lengthen the electric shock, DO NOT pull or drag or the power supply line.
2. Ventilation: This set must be put in ventilated place. DO NOT put disk on it or cloth to cover it. The
distance away from the wall should not be less than 10 centimeters. DO NOT put this set on the bed,
sofa, carpet or other objects with similar surface in case of good ventilation.
3. Casing Dismantling: DO NOT dismantle the casing . If one touches the inner components, he will 
probably get serious electric shock.
4. Unusual smell: When you discover unusual smell and smoke, cut power supplies immediately and
pulls out the plus from the outlet on the wall. Contact the sell shop or nearest repairing center.
Attention: This set applies to AC 110V~240V / 50Hz~60Hz power supply. Use standard power supply.
                  Please be sure for te correct power supply before use it.
IMPORTANT SAFETY MEASURES
REAR PANEL FUNCTION INSTRUCTION
PRODUCT FEATURES
WIRELESS
 INSTRUCTION
Change the mode into “BLUC”, the wireless sign light twinkles, and 
speaker have sound “di”. Set on mobile phone, connect to wireless 
data, search equipment and match properly. The proper connect 
wireless lights keep on, and music work on speaker normally.
CONNECTING
1
. This set applies to AC 100V-240V, 50/60Hz
2
. AC power: battery can be charged when connected to AC power. 
    Red light on battery is charging, it will change to green once bat-
    tery complete charge.
3
. Internal battery will be charged even device switch off when plu-
    gged in to AC power
4
. Speaker battery can be charged using 12V external car battery 
    as well(connect cable not included) by "DC 12V input". Please 
    make sure "+" and "-" in right connection.
5. Adjust function keys to your personal audio preference.
●Wireless
●Plays Mp3 files stored in SDC card/USBC drive/external audio 
  device
.
●FM radio     ●Guitar input     ●Microphone inputs
●Wireless microphone included     ●With remote control
●Built-in rechargeable battery    ●Super dynamic sound speaker
BATTERY
 & CHARGING
1
. The units takes approximately 8 hours to fully charge. It will 
    automatically begin charging once the power cord is connected.
2
. If the battery power is low may caused sound distortion or stop 
    play, please charging the battery on time.
3
. To maximize the battery's lifespan, please charging the battery
    immediately. When the unit is not used for prolonged periods of 
    time,the battery will gradually lose its power. It is recommended 
    to fully charge the battery at least every 30days.
4
. To saving battery, please power off once stop using. 
148.5mm
148.5mm
148.5mm
148.5mm
210mm
210mm
REMOTE CONTROL
Standby
USBC/SDC/LINE (Audio input)
Prev/FM CH- 
Play/pause/FM tuner
Next/FM CH+
Repeat
Stop
Volume up
Volume down
Mute
Equalizer
Number
TQ-LT1203                           TQ-LT1204