ShenZhen ChangShengWei Industry Co. LTD. K1 User Manual
80
.0
0
m
m
80.00 mm
Thank you for choosing Portable Microphone Wireless K1 Karaoke
Speaker. K1 Speaker is a karaoke speaker with colorful led light
fucntion.
K1
80 x 80 x 245mm
Weight: 250g
0.4W
2200mAh
3
Please make sure that the K1 karaoke speaker is fully charged
before first use.
Power On/Off
1. Long press the Power On/Off button to turn it ON or OFF
2. Then first long press Power button, then enter the Bluetooth Pair Mode .
3. Shot press the Power Button to change the Lighting Mode.
4. TF card music playing will automatically switch when inserted TF card.
Voice prompts will sound before bluetooth pairing and TF card music playing.
Button ICON
1. Short poke the knob downward to play the next song and long poke to Volume
up.
2. Short poke the knob upward to play the last song and long poke to volume
down.
3. Click knob to play or pause the music.
4. Slide the Echo Key upward to adjust the echo to big, slide the Echo key
downward to adjust the echo to small.
5. Slide the Volume Key upward to adjust the mic volume to big, slide the
Volume Key downward to adjust the mic volume to small.
Play music from bluetooth enabled devices, like smart phones,tablet PC,
computer and etc
This speaker supports the bluetooth device with A2DP function.Slide the power
switch first, then enter the Bluetooth mode, bluetooth indicate blue flicker
alternately, together with voice prompts, the speaker is in imparing state at this
moment, and only in the state bluetooth can be impaired and connected
successfully.
1. Mobile phone connection:
Step1. Open the bluetooth setting on your phone or tablet and click ‘Search
device’, cellphone will search for bluetooth devices automatically.
Step 2. Find the bluetooth speaker Name, click and connect it.
Step 3. Enter ‘0000’ and click ok if there’s a prompt that requires you to enter a
password.
2. Bluetooth paring and connection
1. If the speaker has been connected with Bluetooth devices before, it will
connect with the last Bluetooth device automatically once it is turned on.
2. If the speak has not been connected with Bluetooth devices before, it will
enter impairing mode, click connectin is achievable.
3. Other phone or tablets can not be connected with the Bluetooth when the
speaker is being connected with a phone or tablet.
4. The phone or tablet can not be connected with the Bluetooth speaker if it is
connecting with other Bluetooth device. You should turn off your bluetooth
connection and connect your phone with Bluetooth speaker again.
非常感谢您选择K1 K歌蓝牙音响!
K1 音响是一台多功能的七彩发
光K歌蓝牙音箱。
使用前请阅读此份说明书。
使用前请阅读此份说明书。
首次使用前,请先确保K1音响电量充足。
1. 将USB充电线连接K1音响;
2. 当指示灯显示红色状态时,处于充电状态;
3. 当充电结束时,指示灯将熄灭。
1. 将USB充电线连接K1音响;
2. 当指示灯显示红色状态时,处于充电状态;
3. 当充电结束时,指示灯将熄灭。
1.长按电源开关至开启状态,进入蓝牙配对状态;
2. 当插入TF卡时,将自动播放TF卡音乐;
在蓝牙配对和TF卡播放音乐时,均有声音提示。
在蓝牙配对和TF卡播放音乐时,均有声音提示。
支持有蓝牙的智能设备进行音乐播放,如笔记本、平板、手机等
说明书
产品规格
产品名称:K歌蓝牙音响
型号:
型号:
K1
输入电源:
DC5V, 500mA
输出功率:
3W
喇叭频率:
20Hz~20KHz
支持协议:
HSP、HFP、A2DP、AVRCP
无线频率:
2.4GHz~2.48GHz
无线传输:
ClassII(-6dBm~+4dBm)
产品尺寸:
80*80*245mm
重量:
250g
LED灯功率: 0.4W
电池规格:
3.7v 2200mA
蓝牙版本:
3.0
材料:
ABS塑胶
充电时间:
2.5小时
传输距离:
10米
播放时间:
3小时
按键示意图
充电
电源开关
按键图标
1. 向下轻轻拨动滚轮键时,播放下一曲; 长用力拨动时
,音量加
2. 向上轻轻拨动滚轮键时,播放上一曲; 长用力拨动时
,音量减
3. 轻按滚轮键即即可进行音乐播放和暂停
4. 拨动ECHO键,向上即调大混响,向下即调小混响
4. 拨动VOLUME键,向上即调大麦克风声音,向下即调
小麦克风声音。
2. 向上轻轻拨动滚轮键时,播放上一曲; 长用力拨动时
,音量减
3. 轻按滚轮键即即可进行音乐播放和暂停
4. 拨动ECHO键,向上即调大混响,向下即调小混响
4. 拨动VOLUME键,向上即调大麦克风声音,向下即调
小麦克风声音。
首先打开电源开关,进入蓝牙状态,蓝牙指示将变蓝 ,同时有声音
提示,音响进入配对状态。(仅在蓝牙状态时才可进行配对和连接
成功)
1. 手机连接:
第一步. 打开手机蓝牙或平板蓝牙设置,并进行蓝牙搜索
第二步. 寻找蓝牙音响名称,点击并进行连接
第三步.当提示需要输入密码时,输入“0000”点击进行配对
2. 蓝牙配对和连接
2.1 当音响已经连接过蓝牙设备,再次打开音响,将会自动回连至上
一台蓝牙设备。
2.2 当音响未连接设备时,打开后将处于配对状态并可以进行搜索和
连接
2.3 当音响已经连接至手机或平板时,其它设备将无法连接到K1音响
2.4 当音响已经连接至手机或平板时,其它设备将无法连接到
K1音响,用户将需要关闭已经连接的手机或平板蓝牙,再打开需要
连接的手机或平板搜索并连接即可。
提示,音响进入配对状态。(仅在蓝牙状态时才可进行配对和连接
成功)
1. 手机连接:
第一步. 打开手机蓝牙或平板蓝牙设置,并进行蓝牙搜索
第二步. 寻找蓝牙音响名称,点击并进行连接
第三步.当提示需要输入密码时,输入“0000”点击进行配对
2. 蓝牙配对和连接
2.1 当音响已经连接过蓝牙设备,再次打开音响,将会自动回连至上
一台蓝牙设备。
2.2 当音响未连接设备时,打开后将处于配对状态并可以进行搜索和
连接
2.3 当音响已经连接至手机或平板时,其它设备将无法连接到K1音响
2.4 当音响已经连接至手机或平板时,其它设备将无法连接到
K1音响,用户将需要关闭已经连接的手机或平板蓝牙,再打开需要
连接的手机或平板搜索并连接即可。
5
5
蓝牙配对连接
Lamp Function
1. Short press Power button , turn on the light.
2. Short press Power button to change the color.
2. Short press Power button to change the color.
Level 1.
Red
Level 2.
Dark Blue
Level 3.
Green
OFF
灯光功能
STEP:
-->
-->
-->
Portable Microphone Wireless
K1 Karaoke Speaker
Portable Microphone Wireless Karaoke Speaker
TF Card
Knob
Prev/Next Song
Micro USB
Volume
POWER
Colorful
Speaker
ON
-->
Level 4.
Pink
-->
Level 5.
Sky Blue
-->
Level 6.
cyclic change
-->
Level 7.
Along with the music
rhythm changes
-->
FAQ:
1. The Power light is not lit:
Please check the usb cable and charge it.
2. The microphone has no sound.
Please turn K1 power on and adjust the Volume to big.
3. The microphone has no echo.
Please adjust the Echo to big.
4. The sound has noise.
Please confirm whether environmental interference.
5. The music is no sound.
Please adjust the volume from Cellphone or adjust the knob
downward from K1.
便携式麦克风
无线
K歌音响 K1
TF卡
滚 轮:音量/上下曲
Micro USB
Volume麦克风
ECHO混 响
电源开关
七彩LED灯
Mic麦克风
喇叭
1. 轻按电源开关键,即打开灯光.
2. 轻接电源开关,可切换不同颜色灯光。
2. 轻接电源开关,可切换不同颜色灯光。
红灯
深蓝
绿色
关闭
步骤
:
-->
-->
-->
开机
-->
粉色
-->
循环变光
-->
随音乐节奏变化
-->
问题点
:
1. 电源指示灯不亮。
检查USB充电线以及进行充电.
2. 麦克风没有声音.
打开K1 音响电源以及调大麦克风声音.
3. 麦克风没有混响.
调整麦克风混响至合适状态.
4. 有杂音.
请确认周围环境,远离干扰源.
5. 没有音乐声音.
调整手机声音或 长按K1滚轮键下键。
ECHO
Mic