DISPLAY & TECHNOLOGY LIMITED 24G-WR1001NS User Manual
WR1001NS
5
Chapter 2 Hardware Installation
2.1 Led indicators
The top panel contains LED indicators that show the status of the unit.
Name
Status
Indication
Power
Off
Power is off.
On
Power is on.
WPS
Flashing
The LED flashes about two minutes during WPS working.
WAN
LAN(1-4)
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but
there is no activity.
Flashing
There is an active device linked to the corresponding port.
2.4GHz
Off
The wireless function is disabled.
Flashing
The wireless function is enabled. The router is working on
2.4GHz radio band.
2.2 Back Rear Panel
The following parts are located on the rear panel.
WAN: 10/100Mbps RJ45 port. The WAN port is where you will connect Cable/xDSL
Modem or other LAN.
LAN (1,2,3,4): These four LAN ports are where you will connect networked devices, such
as PCs, print servers, remote hard drives, and anything else you want to put on your
network. If you connect this product with the Hub (or Switchboard) correctly, the router’s
corresponding LED and the Hub’s (or the Switchboard’s) must be illuminates.
WPS: With the router powered on, press the button about 2 second, it is WPS function