Unit Connection Technology Co. Ltd FT012TH User Manual

FT012TH Wireless Indoor 8-Channel Thermo-Hygrometer 

Thank you for your purchase of the FT012TH Wireless Indoor 8-Channel Thermo-Hygrometer with 
Display. The following user guide provides step by step instructions for installation, operation and 
troubleshooting.  

1.

Remove  the  battery  door  on  the  back  of  the  display

    。1.  Insert  two  AAA  (alkaline  or 

lithium, avoid rechargeable) batteries in the back of the indoor

 sensor.

Figure 1 

2.

Insert two AAA batteries.

After inserting the batteries, All of the LCD segments will light up for a few seconds to verify all 

segments are operating properly. and then 

icon flash once per 60 seconds thereafter. Each time it 

flashes, the sensor is transmitting data. 

3.

Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 2.