Zhangzhou Echo Technology Co. Ltd MALYAN User Manual

5

The Monoprice Customer Service department is dedicated to ensuring that your ordering, 
purchasing, and delivery experience is second to none. If you have any problem with your order, 
please give us an opportunity to make it right. You can contact a Monoprice Customer Service 
representative through the Live Chat link on our website www.monoprice.com during normal 
business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-6pm PT) or via email at 
support@monoprice.com

Please take an inventory of the package contents to ensure you have all the items listed below. If 
anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 

1x 3D printer 
1x Filament rack 
1x Plastic scraper 
1x USB cable 
1x MicroSD

™

 card 

1x Hex wrench 
1x Power adapter 
1x AC power cord (NEMA 5-15 to IEC 60320 C13) 

16 

Note that the Fill density, Support type, and 
Platform adhesion type options should be set 
according to the needs of the model you are 
printing. 
The Fill density will determine the overall 
strength of the finished object. If printing a 
decorative object, a low fill density is appropriate. 
However, if printing an object that will be used as 
a tool or part (e.g., a gear), a high fill density will 
impart maximum structural strength to the 
finished object. 
If printing something with no overhang, such as a 
cube, you can set the Support type to None. If 
the model has areas that overhang the build plate, 
but which are not overhanging a lower section, 
you can use the Touching buildplate option. The 
Everywhere option is usually only necessary for 
very complex models with parts that overhang 
other parts. 
In most cases, the Brim option for the Platform 
adhesion type is sufficient and is easier to 
remove and clean up. The Raft option builds a 
flat layer on which the model is then built and will 
need to be removed once the print is complete. 
Feel free to experiment with these options to 
achieve the best possible print. 

14. Click the Advanced tab, then change the settings 

to match those in the accompanying image. Note 
that if you have a very high fill density (from the 
previous step), you will want to increase the Cool 
down time (Minimal layer time) to 10 seconds. 

15. Finally, using the included Micro USB cable, plug 

one end into the USB port on the printer, then 
plug the other end into an available USB port on 
your computer. Watch the right hand corner of the 
screen. A bubble will appear in the lower right 
corner of your desktop, which is telling you that 
Windows is installing the necessary printer 
drivers. Click the bubble and verify that the 
drivers have been properly installed.