Transition Networks SSRFB1011-100 SSRFB1011-100-NA Leaflet
Product codes
SSRFB1011-100-NA
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
IEEE Std. 802.3, TS-1000 OAM v2
Data Rate
Copper: 10/100 Mbps Fiber: 100 Mbps
Filtering Addresses
1K MAC addresses
RAM Buffers
256K
Max Frame Size
1916 bytes untagged
1914 bytes tagged
1914 bytes tagged
Switches
SW1: TP Auto-Negotiation
SW2: TP Duplex with
Auto-Negotiation Off
SW3: TP Speed with
Auto-Negotiation Off
SW4: Fiber Duplex
SW5: Link Pass Through
SW6: Mode: Terminal or Center
SW2: TP Duplex with
Auto-Negotiation Off
SW3: TP Speed with
Auto-Negotiation Off
SW4: Fiber Duplex
SW5: Link Pass Through
SW6: Mode: Terminal or Center
Status LEDs
PWR (Power)
TP Duplex/Link/Activity
TP 10 Mbps/100 Mbps
Fiber Link/Activity
Fiber Duplex
TP Duplex/Link/Activity
TP 10 Mbps/100 Mbps
Fiber Link/Activity
Fiber Duplex
Dimensions
Width: 3.25” [82 mm]
Depth: 4.8” [122 mm]
Height: 1.0” [25 mm]
Depth: 4.8” [122 mm]
Height: 1.0” [25 mm]
Power Consumption
3.4 Watts
Environment
0 – 50 C; 5% - 95% humidity non-condensing;
0 – 10,000 ft. altitude
0 – 10,000 ft. altitude
Power
External AC/DC required; 12 VDC 1.25A
Shipping Weight
2 lbs. [.90 kg]
Safety Compliance
Wall Mount Power Supply: UL Listed and CSA certified
Regulatory Compliance
EN55022 Class A, EN55024; CE Mark
Warranty
Lifetime
Ordering Information
SSRFB1011-100
10/100Base-TX (RJ-45)
[100 m/328 ft.]
100Base-FX 1300nm MM ST
[2 km/1.2 mi.] Link Budget: 11.0 dB
SSRFB1013-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SSRFB1014-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SSRFB1040-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs
SSRFB1029-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSRFB1029-101
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSRFB1029-102
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[40 km/24.9 mi.] Link Budget: 19.0 dB
SSRFB1029-103
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[40 km/24.9 mi.] Link Budget: 19.0 dB
Optional Accessories
(sold separately)
SFP Modules
Wide Input (24 – 60 VDC) Power Supplies:
SPS-2460-PS
Piggy Back Power Supply
SPS-2460-SA
Stand-Alone Power Supply
Mounting Options:
E-MCR-05
12-Slot Media Converter Rack
RMS19-SA4-01
4-Slot Media Converter Shelf
WMBL
Wall Mount Bracket 4.0" [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0" [127 mm]
WMBD
DIN Rail Bracket 5.0" [127 mm]
WMBD-F
DIN Rail Bracket (flat) 3.3" [84 mm]
Read Management Features
Power
Copper Link Status
Copper Speed
Copper Duplex
Fiber Link Status
Fiber Duplex
Fiber Loop Back Status
AUTO NEG
AUTO CROSS
FAR END FAULT LINK PASS THRU
TRANSPARENT
RAAN AREEN
NS
NT
ALLOCATION
BANDWIDTH
LOOP BACK
LAST GASP
REMOTE MGMT
LINK RESTORE
AUTO
SSRFB10xx-10x
stand-alone network interface device
10/100BASE-TX to 100BASE-FX
with Remote Management
Remotely Managed 10/100 Bridging NID
(Network Interface Device)
(Network Interface Device)
Ideal for both Enterprise and Service Provider applica-
tions where entry level management information is
needed on both the local and the remote device. This
management information is accessible through the local
unit installed in a managed Point System™ Chassis as
the remote stand-alone unit reports its current operat-
ing status back to a local unit.
tions where entry level management information is
needed on both the local and the remote device. This
management information is accessible through the local
unit installed in a managed Point System™ Chassis as
the remote stand-alone unit reports its current operat-
ing status back to a local unit.
Devices should be used in pairs with the remotely man-
aged stand-alone unit used in conjunction with the man-
aged chassis card CSRFB10xx-100.
aged stand-alone unit used in conjunction with the man-
aged chassis card CSRFB10xx-100.
Integrate fiber into 10/100 copper
environments
environments
Remote Mangement Remote stand-alone
units report their status to local managed unit
units report their status to local managed unit
Remote Loopback assists in identifying
network problems
network problems
Bandwidth Control sets throughput to
user’s requirements
Features
Auto-Negotiation
AutoCross™
Far-End-Fault (FEF)
Transparent Link Pass Through
Bandwidth Allocation
Loopback
Last Gasp
Remote Management
Automatic Link Restore
Link Test
Remote Status Reporting Conversion