Dongguan Tiremagic Electronic Technology Co. Ltd CW100 User Manual

Page of 2
 
 
Note 
* Before install should study this manual. 
* Don’t beat the sensor. 
* The system can send light and voice alarm when tire pressure and 
temperature not normal. 
TPMS Work Introduce 
System include one TPMS serial and 4 sensors, sensor measure 
the  pressure  per  4s,  if  pressure  normal,  when  the  car  is  in 
stopping, sensor will send signal per 4 minutes, when the car is 
in motion, send signal per 1 minutes, if pressure error, sensor 
send signal per 30s,TPMS serial can send signal to master per 4s,as 
the TPMS serial message, master judge tire pressure or temperature 
error, alarm auto. 
TPMS receiver introduce 
 
 
                        
GND 
                       TX 
                       RX 
                      +12V 
                      
 
1、 TPMS serial get the sensor signal and send to master; 
2、 Voltage is 12V,mater provide power; 
3、 12V=Red,RX=Blue,TX=White,GND=Black; 
4、 TPMS serial install master above 50cm place. 
5、 TPMS serial  
Communication 
as the RS232 as the main agreement ,
Level is TTL level,if need communication with PC,need add the Serial ports 
change USB or TPMS Receiver add Level change IC, if need, contact factory;
 
 
7、TPMS base function,as the data show,low pressure, high pressure, high 
temperature alarm.ID setting, and some valve setting, need the master 
done. 
  8、
TPMS serial have two item, one is car 4tire-5tire.one is 6 more tire use.   
 
 1 
Sensor ID setting                                                                                                               
 
1.  Before shipping, sensor ID and postion have set in TPMS serial, you can 
install as the sensor postion, no need setting; 
2.  When sensor need replacement, need use master operate postion tire ID study or ID 
study manual, then TPMS receiver get into ID study status. then let the change 
sensor put into leak or Aerated status(or use the tools wakeup senor)this time 
receiver can use the new sensor ID, and inform the master, master receive the 
confirm message and inform change ID success. 
Sensor instalationl: 
                                                               
 
                                                                                                                   
     
 
 
 
 
     
                           
                           
TPMS Serial 
 
 
 DVD