ShenZhen Porcsi Technology Co. Ltd TN200 User Manual
Note
* Before install should study this manual.
* Don’t beat the sensor.
* when tire pressure and temperature not normal, system can send
light and voice alarm.
TPMS Work Introduce
System include one TPMS serial and 4 sensors, sensor can
install inside the tire, instead of the car valve, sensor measure
the pressure per 4s,if pressure normal, when the car is in
stopping, sensor will send signal per 4 minutes, when the car is
in motion, send signal per 1 minutes, if pressure error, sensor
send signal per 30s,TPMS serial can send signal to master per 4s,as
the TPMS serial message, master judge tire pressure or temperature
error, alarm auto.
TPMS receiver introduce
the pressure per 4s,if pressure normal, when the car is in
stopping, sensor will send signal per 4 minutes, when the car is
in motion, send signal per 1 minutes, if pressure error, sensor
send signal per 30s,TPMS serial can send signal to master per 4s,as
the TPMS serial message, master judge tire pressure or temperature
error, alarm auto.
TPMS receiver introduce
GND
TX
RX
+12V
1、 TPMS serial get the sensor signal and send to master;
2、 Voltage is 12V,mater provide power;
3、 12V=Red,RX=Blue,TX=White,GND=Black;
4、 TPMS serial install master above 50cm place.
5、 TPMS serial
RX
+12V
1、 TPMS serial get the sensor signal and send to master;
2、 Voltage is 12V,mater provide power;
3、 12V=Red,RX=Blue,TX=White,GND=Black;
4、 TPMS serial install master above 50cm place.
5、 TPMS serial
Communication
as the RS232 as the main agreement ,
Level is TTL level,if need communication with PC,need add the Serial ports
change USB or TPMS Receiver add Level change IC, if need, contact factory;
7、TPMS base function,as the data show,low pressure, high pressure, high
temperature alarm.ID setting, and some valve setting, need the master
done.
done.
8、
TPMS serial have two item, one is car 4tire-5tire.one is 6 more tire use.
1
Sensor ID setting
1. Before shipping, sensor ID and postion have set in TPMS serial, you can
install as the sensor postion, no need setting;
2. When sensor need replacement, need use master operate postion tire ID study or ID
study manual, then TPMS receiver get into ID study status. then let the change
sensor put into leak or Aerated status(or use the tools wakeup senor)this time
receiver can use the new sensor ID, and inform the master, master receive the
confirm message and informe change ID success.
Sensor instal:
2
TPMS Serial
DVD