Sanitag Technologies Corporation AT00123H User Manual
Setting Up Devices & RF Netwowk
1-17
THIS DOCUMENT IS THE PROPERTY OF SANITAG COMPANY. IT MAY NOT BE COPIED AND REPRODUCED WITHOUT WRITTEN PERMISSION OF SANITAG
COMPANY. COPYRIGHT NOTICES MAY NOT BE REMOVED
3. After the activation of the devices network is constructed as can be seen in Figure
10. So this means that network information can be observed in Figure 10.
Figure 10 - Service manager screen(Connected network).
4. As can be seen from Figure- 9.B, Device ID of the reader is (which is coordinator)
100. In Figure 11, RNID number is circled where it is 100. So this means that
connection information of the router has been reached by the service manager.
RNID represents the reader identity number which is written to backside of every
reader device.
connection information of the router has been reached by the service manager.
RNID represents the reader identity number which is written to backside of every
reader device.
Figure 11-Service manager screen- 1(Reader is connected).