MatchX GmbH MX1702 User Manual
10
Chapter 2. Quick Installation Guide
Firstly connect to power cords from your wall sockets or panel sockets to POE, then connect
the RJ45 cable from your Internet modem/switch/wall port, or any 3G/4G router to the POE’s port
labeled with "LAN". Next, grab a RJ45 cable and connect from the POE’s port labeled with "POE"
to Box.
labeled with "LAN". Next, grab a RJ45 cable and connect from the POE’s port labeled with "POE"
to Box.
Box can also use any 2.4GHz WiFi as a backhaul while powered by POE.
2.4
Mounting
2.4.1
Wall Mounting
The screws and screw anchors are included in the package, users can drill two 6mm hole on the wall
and apply screw anchors to them.
• Determine the place of mount, should be a even surface
• Mark two holes that are going to be drilled, the distance is 32.2mm, should be horizontally
• Mark two holes that are going to be drilled, the distance is 32.2mm, should be horizontally
aligned
• Drill two 6mm hole, pply screw anchors and screws
• Adjust the screw space
• Mount Box to the screws
• Adjust the screw space
• Mount Box to the screws