Shen Zhen HongTaiDingYe Electronic Co. Ltd BSS-101 User Manual
Product Manual
This Wireless Selfie Stick is based on Bluetooth HID wireless
technology. Please confirm that your phone or device support
this technology,It can recognize and works with smart phones
with IOS 4.0 and Android 3.0 system or highter version.
technology. Please confirm that your phone or device support
this technology,It can recognize and works with smart phones
with IOS 4.0 and Android 3.0 system or highter version.
Function
Wireless controls your device to take selfie pictures and videos
from great angles
from great angles
Parts included in the package
Selfie Stick: 1piece
Phone clamp holder: 1piece
Rubber gasket: 1piece
USB charing cord: 1piece
USB charing cord: 1piece
Instruction Manual: 1piece
Selfie Stick: 1piece
Phone clamp holder: 1piece
Rubber gasket: 1piece
USB charing cord: 1piece
USB charing cord: 1piece
Instruction Manual: 1piece
Working environment
Temperature: -10℃ to 40℃
Humidity: 10% to 90%
Temperature: -10℃ to 40℃
Humidity: 10% to 90%
Specification
Battery Capacity: 55mah
Charging time : around 40 minutes
Charing Voltage:DC 5v
Standby Time: around 100 hours
Usage: take up to 500 pictures per charge
Battery Capacity: 55mah
Charging time : around 40 minutes
Charing Voltage:DC 5v
Standby Time: around 100 hours
Usage: take up to 500 pictures per charge
Operating Instruction
1.Pairing your device with Monopod ios system:OPen
"Settings" then open "Bluetooth",your device will
automatically searching to pair;
turn on the Monopod,you will find "Shutter", click to connect
your device and Monopod,After successfully setting up the
connection,you can then open your camera to take great
pictures and videos!
"Settings" then open "Bluetooth",your device will
automatically searching to pair;
turn on the Monopod,you will find "Shutter", click to connect
your device and Monopod,After successfully setting up the
connection,you can then open your camera to take great
pictures and videos!
Android system:OPen "Setting" open "Bluetooth",then click
"Scanning", your device will start searching to pair;turn on
the Monopod,After successfully setting up the
connection,you can then open your camera o take great
pictures and videos!
"Scanning", your device will start searching to pair;turn on
the Monopod,After successfully setting up the
connection,you can then open your camera o take great
pictures and videos!
Note:The pairing is in process when the blue LED light
on the bottom of the selfie stick handle is flash in middle
speed, You may need to restart the monopod if failed to
set up the connection at the first time,Just follow the
pairing process one more time.
on the bottom of the selfie stick handle is flash in middle
speed, You may need to restart the monopod if failed to
set up the connection at the first time,Just follow the
pairing process one more time.
Some Android system devices might not work with the
monopod properly,You can try switching monopod
system(Read further instruction below,or you can
download"Camera 360" APPand try again")
monopod properly,You can try switching monopod
system(Read further instruction below,or you can
download"Camera 360" APPand try again")
2.How to switch the system
Push the "Press"button and turn on the power of the monopod
at the same time,And pair it with your device.
at the same time,And pair it with your device.
Caution and safety
Remarks
1.Please read the instruction carefully before usage;
2.Other Bluetooth devices may generate single interference'
3.It may cause conflict when using other Bluetooth devices
with the monopod at the same time .Please try to use either
at one time.
4.Do not try dismantling the monopod yourself;
5.Do not use corrosive solvent to clean the monopod;
6.Do not use the monopod or charge it when environment is
hot and directly in strong light;
7.Do not use the monopod when it is wet
8.Do not throw the monopod into the fire'
9.Do not try to detroy the monopod with violence;
2.Other Bluetooth devices may generate single interference'
3.It may cause conflict when using other Bluetooth devices
with the monopod at the same time .Please try to use either
at one time.
4.Do not try dismantling the monopod yourself;
5.Do not use corrosive solvent to clean the monopod;
6.Do not use the monopod or charge it when environment is
hot and directly in strong light;
7.Do not use the monopod when it is wet
8.Do not throw the monopod into the fire'
9.Do not try to detroy the monopod with violence;
1.The LED light will light up and stay on for about 3
seconds then go off for 3 seconds,At the end it will start
flashing;
1.When the LED light is off,either the switch is not turned
on or the battery is out of power
2.When the LED light is flashing in middle speed,it is in
the process of pairing
3.After successfully paired with your device, the LED light
will flash very quick for about 10 seconds and then goes
off;
4.The LED light will flash once along with each press;
5.When the LED light flashing in slow speed,you will need
to charge the monopod;
6.The LED light is in red color when charing and the light
will go off when it is fuly charged
seconds then go off for 3 seconds,At the end it will start
flashing;
1.When the LED light is off,either the switch is not turned
on or the battery is out of power
2.When the LED light is flashing in middle speed,it is in
the process of pairing
3.After successfully paired with your device, the LED light
will flash very quick for about 10 seconds and then goes
off;
4.The LED light will flash once along with each press;
5.When the LED light flashing in slow speed,you will need
to charge the monopod;
6.The LED light is in red color when charing and the light
will go off when it is fuly charged
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
Caution: Any changes or modi?cations to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Bluetooth Remote Shutter
BSS-101
The device has been evaluated to meet general RF exposure
exposure requirement. The device can be used in portable
exposure condition without restriction.