Brightswitch Inc 201 User Manual
15
--USING SECURITY--
Please see pages
SECURITY DISPLAY
and
Security Setup Menu
for details.
Setup Security in the following manner:
1) Setup a security zone. One or more Brights make up a zone.
2) Optionally enter your phone information along with a Gmail account to allow Brightswitch to send you a
message and picture if an alarm is triggered. This information will automatically be shared with all Brights in the
zone.
3) Optionally assign a security code for entry and exit. This code will automatically be shared with all Brights in
the zone.
4) Select your Entry and Exit delays. The Exit delay is to give you time to exit the home after activating the
alarm. The Entrance delay is to give you time to enter and type in your security code before the alarm is
triggered.
5) Select whether you will toggle on the audio and/or light alarms. These are individual to each Brightswitch
in the zone. When on, the light will come on and the Brightswitch will sound an alarm when the the alarm is
triggered.
Security Use
1) Touch "Alarm On" to enable the alarm. Enter your code if one was selected. Exit the house during the Exit
delay.
2) All Brights in the zone will be set to enabled.
3) Touch "Alarm Off" to disable the alarm. Enter your code if one was selected. Enter the house during the
Entrance delay
4) All Brights in the zone will be set to disabled.
5) If movement is detected after the exit and entrance delays have expired, the alarm will be activated.
6) The Bright first sensing movement will take a picture and optionally send it to your phone, then it will begin
recording video for up to 5 minutes.
7) All Brights in the zone will alarm. If movement is detected at any one of them, it will all also optionally send a
picture to your phone and begin recording video for up to 5 minutes.
8) Pictures sent to your phone will contain a text header telling you the name of the Bright, the event and the time
and date.
End Security Page