SAATI ENTERPRISES INC. SAATIMINI User Manual

•  CHARGE THE SPEAKER SYSTEM

SAATI utilizes a micro USB charging port. Connect the 

micro USB connector end of the cable to the unit and 

the standard USB connector end to a personal com-

puter. Optionally, the standard USB cable end can be 

connected to a mobile phone charger. Note that the 

mobile phone charger is not supplied with the unit!
The LED indicator on the rear of the unit will stay 

red until the unit is fully charged. Once charging is 

complete, the LED will automatically turn off. 

•  TURN THE UNIT ON/OFF 

Press and hold the power button for 3 to 4 seconds 

until you hear audible sounds from the unit that it 

is on.  
To turn the unit off, simply press and hold the power but-

ton until you hear an audible that the unit is turning off.

 

• PAIRING

Turn on the unit. If the unit has not been paired before, 

the LED indictor in the rear of the unit will blink blue. 

This indicates that the unit is ready for pairing.
While the blue LED is blinking on the unit, navigate 

to the Settings menu on your mobile device. Select 

Bluetooth® and check that Bluetooth is enabled.  

Otherwise, enable Bluetooth on your mobile device. 

Then, in the Bluetooth settings screen, look under 

New Devices or Other Devices and select the device 

that starts with SAATI and select.

 

   

SPEAKER HELMET

AIRING, BUILT-IN MICROPHONE