MODERN ELECTRONICS FACTORY LIMITED 696MET86BT User Manual
POWER SOURCE
3
The unit has a built-in Li-ion rechargeable battery, charge it before first time use or
when it is drained as follows:
1.
when it is drained as follows:
1.
Connect the small plug from the supplied USB Connection Cable to the Micro USB
Port on the rear of unit.
Port on the rear of unit.
2.
Connect the full size USB Plug from the supplied USB Connection Cable to the USB
Port on the Personal Computer or USB Charger (Computer and USB Charger not
included).
Port on the Personal Computer or USB Charger (Computer and USB Charger not
included).
3.
When charging, the (Charge) Indicator on the top of unit will illuminate. When
charging is complete, it will turn off.
charging is complete, it will turn off.
NOTES:
Your battery will last longer if you following these simple guidelines for caring and storing:
A. Before first time use, recharge the unit approximately 2 hours until the unit is fully
Your battery will last longer if you following these simple guidelines for caring and storing:
A. Before first time use, recharge the unit approximately 2 hours until the unit is fully
charged.
C. Charge and store the unit within the temperature range of 5°C - 35°C (40°F - 95°F).
D. Do not overcharge (longer than 24 hou
D. Do not overcharge (longer than 24 hou
B. If the power of the built-in battery less than 5%, the (Charge) Indicator will
illuminate and blink. Recharge it immediately.
rs). Excessive charging or running the unit
until battery fully drains will damage battery. Battery life will be extended if you keep
the battery fully charged.
the battery fully charged.
E. Battery life naturally shortens slowly over time.
F. The rechargeable battery incorporated in this product is not user replaceable.
F. The rechargeable battery incorporated in this product is not user replaceable.