Shenzhen Auzone Technology Co. Ltd TS01 User Manual

    Before using this product, please read this manual carefully, familiarize 
yourself with the product structure, and understand the installation method. 
Before installation, please confirm the presence of all accessories, that the 
product functions properly, and that there is no abnormality in appearance and 
structure. Installation should be performed strictly according to maintenance 
operation norms and with the use of professional tools. Any error caused 
through deviation from these rules is not the fault of the company. You must 
stop using the product should any problems arise during operation and report 
the issue to professional maintenance or after sales staff for inspection. Once 
installed, the dynamic balance of the tire must be measured to eliminate any 
hidden dangers.

Storage temperature: - 50 ℃ ~ 125 ℃
Operating temperature: - 40 ℃ ~ 105 ℃
Pressure range: 0-800kpa
Waterproofing grade: IP67
Transmitting power: <10dBm
Transmitting frequency: 433.92MHz
Measurement sensitivity: 7Kpa
Weight: 25g (with valve stem)

① ②    ③   ④  ⑤

Step 1: Insert the valve stem through the wheel hub and fasten the nut. Do not tighten.
Step 2: Fasten the sensor to the valve stem using a sensor-fastening screw. Ensure the sensor
              is close to the wheel hub with a torque of 4N·m.
Step 3: Use a spanner to tighten the valve stem nut and complete the installation. Ensure the 
             spanner applies a torque of 4N·m.

① Set screws on the sensor
② Tire pressure sensors
③ Metal valve stem
④ Valve stem nut
⑤ Valve stem cap