Polysense Technologies Co. Ltd. WXS8000 User Manual
User Guide
Revision 0.1
Revision 0.1
XXX-XXXX
Polysense WxS8000 User Guide
Rev 2.3, Mar 26, 2018
Polysense WxS8000 User Guide
Rev 2.3, Mar 26, 2018
Polysense, Inc. Confidential
Page 11
o CID: command ID to identify one specific command initiated from LoRa server, below table
shows all the commands:
CID
Command
Format# Comment
0x2
PlssReboot
1
Reboot WxS8000 immediately
0x8
PlssGetInfo
1
Get WxS8000 management information,
WxS8000 should respond this with Mote
information report message in next uplink
transmission window
0x13
PlssSetPPB
3
Set specific attribute in WxS8000 PPB
(Polysense Proprietary Base)
0x14
PlssSetPRB
3
Set specific attribute in WxS8000 PRB
(Polysense Runtime Base)
0x15
PlssSetClk
2
Set WxS8000 local date-time to align with the
server
0x19
PlssSetExtCntr
2
Set the counter of the external counter sensor
to the value specified in Value field
0x1A
PlssGetPPB
3
Get specific attribute in WxS8000 PPB, and
there is NO Value parameter in format#3 above
o Value: the value to be set to WxS8000
o Attribute: identify one specific attribute in PPB or PRB
o ValueLength: the length of the value in octet
If the FRMPayload length allows (the MAX FRMPayload length is region-dependent), LoRa
server can pack multiple downlink messages together and fill into the FRMPayload of one LoRa
frame in order to improve the transmission efficiency. Once WxS8000 receives the frame, it will
parse out all the messages, and process one by one.
parse out all the messages, and process one by one.
If there is PlssReboot message inside the FRMPayload which consists of multiple messages,
then WxS8000 won’t execute reboot until all other messages are handled
4.1.1. Set Individual Attribute in PPB (PlssSetPPB)
The change to PPB attributes can take effect immediately except the change of REGION, which will take
effect only after WxS8000 reboot or power recycle.
4.1.1.1. General Attributes
Attribute Description
ValueLength
(bytes)
Value
Comment
0x2
REGION
1
0 – US902
LoRa region setting. WxS8000 supports all the regions as
defined in LoRaWAN spec 1.0.2, besides WxS8000