Polysense Technologies Co. Ltd. WXS8000 User Manual
User Guide
Revision 0.1
Revision 0.1
XXX-XXXX
Polysense WxS8000 User Guide
Rev 2.3, Mar 26, 2018
Polysense WxS8000 User Guide
Rev 2.3, Mar 26, 2018
Polysense, Inc. Confidential
Page 31
5.1.2. Firmware Upgrade
Once the ST-Link and ST-Link Utility are set up properly, user can follow below procedure to do the
firmware upgrade.
5.1.2.1.
Upgrade Old WxS8000 Firmware – Single Image
1. lick [Target] -> [Program&Verify] menu item in ST-Link Utility, and select the new firmware (for
example, plss_eng_mote.bin) to be downloaded in the pop-up dialog as shown below, then
click [Open] button
2. The below download diagram will be popped up once the [Open] button is clicked, in this
diagram, it is important to input 0x08000000 as the start address, which the new firmware will
be programmed on flash, and select [Reset after programming] checkbox (so that WxS8000 will
be reset automatically after the new firmware downloading), then click [Start] button to start
firmware downloading