Polysense Technologies Co. Ltd. WXS8000 User Manual
User Guide
Revision 0.1
Revision 0.1
XXX-XXXX
Polysense WxS8000 User Guide
Rev 2.3, Mar 26, 2018
Polysense WxS8000 User Guide
Rev 2.3, Mar 26, 2018
Polysense, Inc. Confidential
Page 7
2. The DC cable hole/gland is also optional, if WxS8000 is powered by AA battery, and there is also
no external sensor to be connected to WxS8000, then there is no DC cable hole on the
enclosure
2.1.
Antenna
WxS8000 supports internal coil antenna and external antenna, by default, it will use external
antenna, there is a SMA tail cable installed to connect the IPX socket on PCB to external antenna,
user just needs to screw the external antenna to the SMA connector on the enclosure.
2.2.
Power source
If AA battery is used as power source, it is strongly recommended to use the 3.6V LI/SOCl2 AA
battery. User can use one AA battery, or 2 AA batteries which can double the life cycle of the
battery power supply.
Please follow the battery polarity mark on PCB to ensure the battery is installed correctly.
Battery power supply and external DC power supply are mutually exclusive; they can’t be used to
Please follow the battery polarity mark on PCB to ensure the battery is installed correctly.
Battery power supply and external DC power supply are mutually exclusive; they can’t be used to
power WxS8000 at the same time.