Travis GT b.v. TB001 User Manual
7
8
9
10
Step 1
Go to www.travistranslator.com/blue to download the
mobile phone app (iOS or Android version as required).
Then, turn on the speaker and pair the speaker with the
mobile phone with the app installed. About how to pair
the two, refer to “How to pair a speaker”.
mobile phone app (iOS or Android version as required).
Then, turn on the speaker and pair the speaker with the
mobile phone with the app installed. About how to pair
the two, refer to “How to pair a speaker”.
Use mobile phone to scan QR code
to download APP
to download APP
Step 3
Press the left/right translation button on the speaker.
When a prompt tone is generated, you can speak out
what you want to translate. When a prompt tone is
generated again, the translation result will be output.
When a prompt tone is generated, you can speak out
what you want to translate. When a prompt tone is
generated again, the translation result will be output.
NOTE: Battery capacity can be displayed (available in
certain systems only).
LED indicator
How to translate
Paring
Flashing blue/green alternately
Paired
Slow flashing blue
Charging
Light up red while charging and turn off
when fully charged
when fully charged
Full battery
The LED turns off when fully charged
Low battery
Fast flashing green 5 times
When you are speaking
Fast flashing blue
Translating
Fast flashing green
About translation and language:
Currently, only online translation is supported. Therefore, the mobile phone needs to be
Currently, only online translation is supported. Therefore, the mobile phone needs to be
connected to the Internet.
Quick guide
www.travistranslator.com
Step 2
Start the app on the mobile phone and wait until
successfully paired. Then, select languages. The
language on the left corresponds to the left translation
button on the device, and that on the right to the right
translation button.
successfully paired. Then, select languages. The
language on the left corresponds to the left translation
button on the device, and that on the right to the right
translation button.
Press
Prompt
Speak
Translation