Arlo Technologies Inc. 18200352 User Manual

6.  Under If the following, tap or click Edit

next to Motion is detected.

The Motion detection settings page displays.

7.  Move the slider to adjust the sensitivity level for motion detection for this 

camera.

If you used a mobile device to specify the settings, your settings are saved.

8.  If you used a browser to specify the settings, click Save.

Your settings are saved.

¾ To change audio sensitivity for a camera:

1. Tap 

the 

Arlo icon 

 on your mobile device.

You can also enter 

in the address bar of a browser.

The Devices page displays. 

2.  Tap or click Mode.

A list of cameras displays.

3.  Tap or click the Arlo Go camera.

A list of modes displays.

4.  Tap or click Edit 

next to Armed.

The Edit Rule page displays.

5.  Tap or click Edit 

next to the rule.

6.  Under If the following, tap or click Edit

next to Audio is detected.

7.  Move the slider to the desired level of audio detection.

If you used a mobile device to specify the settings, your settings are saved.

DRAFT