Mobius Mobility LLC 22007 User Manual
D
riv
in
g
M
o
d
e
s
a
n
d
T
e
c
h
n
iq
u
e
s
ENTRY TO STAIRS - SOLO
STAIR
STAIR
WARNING
Avoid sloped landings or stair entries. While the device will
prevent you from entering stair mode on some slopes, On
landings or entries that are slightly sloped, you may be able to
enter
prevent you from entering stair mode on some slopes, On
landings or entries that are slightly sloped, you may be able to
enter
Stair Mode
.
Accidentally entering stair mode on a slope can result in
unintentional rolling. The device can fall over if you enter stairs
without adequate control. Personal injury or death could result.
unintentional rolling. The device can fall over if you enter stairs
without adequate control. Personal injury or death could result.
If there is an obstacle or lip on the landing, be
cautious when pulling/pushing back. The front
wheels may begin to rotate. Follow solo stair
climbing instructions to continue.
cautious when pulling/pushing back. The front
wheels may begin to rotate. Follow solo stair
climbing instructions to continue.
If the wheels start to rise off the ground,
stop pulling/pushing back and lean forward
to place the wheels on the ground and seek
an alternate route.
stop pulling/pushing back and lean forward
to place the wheels on the ground and seek
an alternate route.
CLUSTER SAFETY LOCK
The ibot has a climbing pattern in
Stair Mode.
The device is leaned (forward or back) to get the
wheel clusters to rotate, then brought back close
to the normal starting position to slow the
cluster down when the moving wheels are close
to the next step.
wheel clusters to rotate, then brought back close
to the normal starting position to slow the
cluster down when the moving wheels are close
to the next step.
The ibot is programmed to expect this climbing
pattern. If you do not bring the angle of the
backrest to the normal starting position when the
wheels are close to the next step, the ibot will
bring the cluster to a stop and sound a tone. The
clusters stay locked in that position until you
return the seat angle back to the normal starting
position. You will need to lean back or pull
forward until the tone stops to return the device
to the normal start position. Maintain your hold
on the handrail(s) (or Assistant on the assist
handle); otherwise, the device may fall.
pattern. If you do not bring the angle of the
backrest to the normal starting position when the
wheels are close to the next step, the ibot will
bring the cluster to a stop and sound a tone. The
clusters stay locked in that position until you
return the seat angle back to the normal starting
position. You will need to lean back or pull
forward until the tone stops to return the device
to the normal start position. Maintain your hold
on the handrail(s) (or Assistant on the assist
handle); otherwise, the device may fall.
DKPX-09006-001-Rev. 1.7
101