Shenzhen Fowke Electronic Technology Co. Ltd X50W User Manual
User manual
8
Notice：
Please use qualified SD card and the transfer speed should be CLASS 10(included) or above.
Before use a new SD card, please format it by camera.
Do not take out the SD card when the camera is working, otherwise the SD card might be
damaged or lose data.
Some of the SD cad might cause camera halted or work abnormally, please try it out to ensure it
is compatible with the camera.
2.2
is compatible with the camera.
2.2
Installation of battery
This camera uses a removable lithium battery, please install the battery correctly before use.
Below is the steps, please refer to the pictures:
1.Please ensure install the battery with the direction of metal contactors upward;
2. Follow the arrow direction on battery compartment, push the battery from down to up until a
“Click” is sounded which means SD card installation is finished.
Below is the steps, please refer to the pictures:
1.Please ensure install the battery with the direction of metal contactors upward;
2. Follow the arrow direction on battery compartment, push the battery from down to up until a
“Click” is sounded which means SD card installation is finished.
Notice：
Please install battery correctly,
incorrect installation
may damage the camera or can’t be
powered on it and cause accidents.
Do not use substandard lithium battery and adaptor.
Adaptor specification: Input AC 100~240V/50~60HZ，output DC 5V/1.5A.
2.3 Charge the battery
2.3.1Install the battery, connect camera with adaptor via USB cable, connect the adaptor with
electric supply. When charging the camera ,the indicator will light up, after fully charging, the
indicator light will be off.
Adaptor specification: Input AC 100~240V/50~60HZ，output DC 5V/1.5A.
2.3 Charge the battery
2.3.1Install the battery, connect camera with adaptor via USB cable, connect the adaptor with
electric supply. When charging the camera ,the indicator will light up, after fully charging, the
indicator light will be off.
2.3.2 Connecting to computer, the camera also can be charged. Install the battery, connect
camera with adaptor with USB cable. When charging the camera ,the indicator will light up, after
fully charging, the indicator light will be off.
camera with adaptor with USB cable. When charging the camera ,the indicator will light up, after
fully charging, the indicator light will be off.
2.3.3 Camera adaptor specification: Input AC 100~240V/50~60HZ，Output DC 5V/1.5A. Please
check the local adaptor specification before use.
2.3.4 Shoot during charging. In order to support long shoot, the camera supports to take photo or
video during charging. When using this function, please connect the adaptor with electric
supply. After connecting according to 2.3.1, power on the camera to shoot.
supply. After connecting according to 2.3.1, power on the camera to shoot.
1. Install battery into the battery
compartment according to this
direction.
direction.
2. Push battery until a “Click” is
sounded