Bogen RPK91 Leaflet

Page of 1
RPK91
Rack Mount Kit
for TAMB2
This kit is for rack mounting
a single TAMB2 unit. 
Screw the RPK91 rack mounting brackets on to the
sides of the TAMB2 using the screws provided with
the TAMB2. Once the brackets have been secured,
the unit can be attached to the rack (rack screws are
user-supplied). 
The RPK91 brackets can be similarly mounted at the
back end of the TAMB2 if a rear-facing orientation
is desired.
50 Spring Street, Ramsey, NJ 07446
Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com
LIMITED WARRANTY; EXCLUSION OF CERTAIN DAMAGES
The Bogen RPK91 is warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the orig-
inal purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be
repaired or replaced by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Depart-
ment, 50 Spring Street, Ramsey, NJ 07446, USA. The product will be returned to you freight prepaid. This warranty does not extend
to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have
been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE
AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. 
Bogen's liability arising out of the manufac-
ture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be
limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING
OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THEPOS-
SIBILITY OF SUCH DAMAGES OR LOSSES. 
Some States do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from State to State.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department — same address as above or call
201-934-8500.  The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service
Department.  All shipping charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return
Authorization number.
7/22/2008
© 2010 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2192-01B   1010
RPK91
Rack Mount Kit
for TAMB2
This kit is for rack mounting
a single TAMB2 unit. 
Screw the RPK91 rack mounting brackets on to the
sides of the TAMB2 using the screws provided with
the TAMB2. Once the brackets have been secured,
the unit can be attached to the rack (rack screws are
user-supplied). 
The RPK91 brackets can be similarly mounted at the
back end of the TAMB2 if a rear-facing orientation
is desired.
50 Spring Street, Ramsey, NJ 07446
Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com
LIMITED WARRANTY; EXCLUSION OF CERTAIN DAMAGES
The Bogen RPK91 is warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the orig-
inal purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be
repaired or replaced by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Depart-
ment, 50 Spring Street, Ramsey, NJ 07446, USA. The product will be returned to you freight prepaid. This warranty does not extend
to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have
been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE
AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. 
Bogen's liability arising out of the manufac-
ture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be
limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING
OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THEPOS-
SIBILITY OF SUCH DAMAGES OR LOSSES. 
Some States do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from State to State.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department — same address as above or call
201-934-8500.  The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service
Department.  All shipping charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return
Authorization number.
7/22/2008
© 2010 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2192-01B   1010