Zhejiang Shunkang Technology Industry Co. Ltd WDJ7052 User Manual
NOTICE!
The preset target temperature is shown on the display as the TARGET TEMP.
3. Sensor in the thickest part of the food whose temperature you would like to monitor. Insert
3. Sensor in the thickest part of the food whose temperature you would like to monitor. Insert
the tip of the temperature sensor in the side of the food so that you can turn the food while
barbecuing it.
barbecuing it.
4. Use the Velcro strip to secure the base unit near the piece of food.
5. Run the cable of the temperature sensor away from the food. Keep the base unit away from
5. Run the cable of the temperature sensor away from the food. Keep the base unit away from
hot surfaces.
6. Use the clip to secure the receiver near the barbecue for easy viewing or attach the receiver
to your clothing (belt or apron, trouser or shirt pocket).
7. As soon as you have placed the food on the barbecue, it will start monitoring the
temperature via the temperature sensor inserted in the food. After a short time, the current
temperature of the food will appear as CURRENT TEMP on the display of the receiver. The
CURRENT TEMP will steadily increase the longer the food is barbecued until the target
temperature has been reached.
temperature of the food will appear as CURRENT TEMP on the display of the receiver. The
CURRENT TEMP will steadily increase the longer the food is barbecued until the target
temperature has been reached.
8. The display indicator will switch to the alarm function when the current temperature reach
15℃ from target temperature (e.g. 45℃ when target temperature is 60℃) , the display will
turn yellow and flash. Additionally, the beep sound will work and repeat 3 times
automatically (each time 2 seconds) to remind user that target temperature is arrived soon.
turn yellow and flash. Additionally, the beep sound will work and repeat 3 times
automatically (each time 2 seconds) to remind user that target temperature is arrived soon.
9. When the temperature reaches the target temperature, the display indicator will switch to
the alarm function again with red backlight and flash. At the same time, the beep sound will
work steadily around 120 seconds, or you can stop it by pressing MEAT/STOP button. Then it
will end the measurement process for the food being monitored by the temperature sensor.
work steadily around 120 seconds, or you can stop it by pressing MEAT/STOP button. Then it
will end the measurement process for the food being monitored by the temperature sensor.
Timer function
If you feel that food is not quite cooked to perfection of would like to cook it some more, you can
use the timer function of the receiver.
1. On the receiver, push the MODE button to select the timer function.
2. The display indicator will switch to the timer function with choice for the minutes (M) and
use the timer function of the receiver.
1. On the receiver, push the MODE button to select the timer function.
2. The display indicator will switch to the timer function with choice for the minutes (M) and
seconds (S). You can set the desired cooking time by pushing the MIN/+ button and/or the
SEC/‐ button on the receiver.
SEC/‐ button on the receiver.
3. Push the TASTE/START button to start the timer function. The timer indicator on the display
will indicate the remaining time for the temperature measurement.
4. Push the MEAT/STOP button to interrupt the timer function. For example to check how well
cooked the food is. Then the timer function is paused, long‐pressing MEAT/STOP button can
reset the timer.
reset the timer.
5. Push the TASTE/START button to re‐start the timer function again. The timer function will not
end when you use the MODE button to switch back to the display with the select functions.
You can stop the timer function with the STOP button.
You can stop the timer function with the STOP button.
6. When the timer runs out, the display indicator will switch to the alarm function with red
backlight and flash. At the same time, the beep sound will work steadily around 120 seconds,
or you can stop it by pressing MEAT/STOP button.
or you can stop it by pressing MEAT/STOP button.