Iconic Audio Limited STBE18 User Manual
READ THIS MANUAL BEFORE USING THIS PRODUCT.
FAILURE TO FOLLOW THE INSTRUCTIONS AND
SAFETY PRECAUTIONS IN THIS MANUAL CAN
RESULT IN SERIOUS INJURY OR DEATH.
INTRODUCTION
Thank you for choosing the Escape Pods, we really
appreciate all your support.
This manual should provide you all the information
that you need to operate your Escape Pods, but if you
experience any issues at all then please don’t hesitate
to contact us on enquiries@escapeaudio.co.uk.
SWITCHING ON AND PAIRING THE ESCAPE PODS
(STEREO USE)
1. Remove both Escape Pods from the charging case
2. Both Escape Pods will now switch on and connect
2. Both Escape Pods will now switch on and connect
automatically with each other
3. After a short ‘beep’ the Escape Pods will now
search for a Bluetooth device
4. Turn on the Bluetooth on your device
CONNECTING THE ESCAPE PODS TO YOUR DEVICE
1. Once the Escape Pods are paired this will be
indicated by flashing red and blue lights in the left
(master) Escape Pod and a flashing blue light in
the right (secondary) Escape Pod
2. Open the Bluetooth option on your mobile device
3. Select the option ‘Escape Pods’
4. Once the connection has been achieved your
3. Select the option ‘Escape Pods’
4. Once the connection has been achieved your
Bluetooth status will display as ‘Connected’ and an
audio message of ‘Connected’ will be transmitted
by the Escape Pods
Right and left earbuds can be used individually
(mono) or simultaneously (stereo)
Diameter: 17mm
Bluetooth Chip: BES2000
Bluetooth Version: V4.2
Bluetooth Frequency: 2.4 GHz
Sensitivity: -38db MIC
Earbud Battery: 50 Mah with rechargeable
Diameter: 17mm
Bluetooth Chip: BES2000
Bluetooth Version: V4.2
Bluetooth Frequency: 2.4 GHz
Sensitivity: -38db MIC
Earbud Battery: 50 Mah with rechargeable
customised Li-ion batteries
Distance: At least 10 meters (without obstacles)
Playing Time: Up to 3 hours
Standby Time: 100 hours (mono), 50
Distance: At least 10 meters (without obstacles)
Playing Time: Up to 3 hours
Standby Time: 100 hours (mono), 50
hours (binaural)
Built-in CVC 6.0 noise cancellation technology
6mm high fidelity speakers
Charging Case: 500 MAH
Support: Android and IOS system
Built-in CVC 6.0 noise cancellation technology
6mm high fidelity speakers
Charging Case: 500 MAH
Support: Android and IOS system
1.
2.
3.
4.
5.
6.
7.
3.
4.
5.
6.
7.
8.
9.
10.
9.
10.
11.
12.
13.
14.
12.
13.
14.
1. Charging Case
2. Charging Indicator
3. Charge Contact Point
4. Ear Tip
5. Ear Brace
6. Microphone
7. Multi-Function Key (Pair, Pause/Play, Answer Call/
2. Charging Indicator
3. Charge Contact Point
4. Ear Tip
5. Ear Brace
6. Microphone
7. Multi-Function Key (Pair, Pause/Play, Answer Call/
Dial, Play Next Song/Previous Song)
PRODUCT FUNCTION PARAMETERS
AUTOMATICALLY RECONNECT THE ESCAPE PODS
1. Ensure that the Bluetooth is activated on the
device that you have previously connected the
Escape Pods to
2. The device must be within 10 meters of the
Escape Pods
3. Press and hold the multi-function button on both
Escape Pods for 6 seconds
4. Both earbuds will automatically connect with each
other (you’ll hear a ‘beep’)
5. The Escape Pods will now search for a Bluetooth
device which they have previously been
connected to
6. The Escape Pods will now automatically connect to
your Bluetooth device
ESCAPE PODS
User Manual
PRODUCT DESCRIPTION
HOW TO USE
SWITCHING ON AND CONNECTING THE ESCAPE
PODS (SINGLE USE)
1. Remove the left Escape Pod from the
charging case
2. Hold down the multi-function button for 6 seconds
3. After a short ‘beep’ the switched on Escape Pod
3. After a short ‘beep’ the switched on Escape Pod
will now search for a Bluetooth device
4. Turn on the Bluetooth on your device
5. Select the option ‘Escape Pods’
6. Once the connection has been achieved your
5. Select the option ‘Escape Pods’
6. Once the connection has been achieved your
Bluetooth status will display as ‘Connected’ and an
audio message of ‘Connected’ will be transmitted
by the Escape Pods